• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New Wheels and Tires

BGBronco

Contributor
N A S H V I L L E
Joined
Jun 23, 2017
Messages
1,543
Loc.
Tennessee
Getting ready to write a check for new wheels and tires. Cut fenders w/ flares, 2.5" lift, mainly in town driving.

This is the direction I'm headed and wanted to get some last minute feedback. Specifically, I want to make sure this setup won't look too small under the cut fenders.

Tires: 33x10.5x15 BFG ATs
Wheels: 15x8 Pro Comp 1069

Feedback appreciated. Thank you!
 

Attachments

  • pcw-1069-6155_ml.jpg
    pcw-1069-6155_ml.jpg
    11 KB · Views: 40
Last edited:

Btempy

Jr. Member
Joined
May 16, 2016
Messages
73
Size wise everything would look fine.

Ive owned a pair of the pro comps wheels on another truck I personally wasn't a fan of the much larger size holes. Compared to eagles 058 as mentioned above or MT classic IIs which are much smaller.
 
OP
OP
BGBronco

BGBronco

Contributor
N A S H V I L L E
Joined
Jun 23, 2017
Messages
1,543
Loc.
Tennessee
Thank you for the input. I thought I needed 3.75 - 4.00 backspacing on the 15x8 rims so those didn't come up when I was looking.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,916
The back of my Pro Comp wheels are powder coated light silver. Brake dust wipes right off of it.
Had similar Eagles and M/T's and they were not powder coated in the back. May not be a big deal to most ...
 

OX1

Bronco Guru
Joined
Aug 26, 2003
Messages
3,458
Not sure how much this helps, but
this is 33 AT's on 15 X 8, 90's bronco wheels
and 3.5 lift. Front is not cut out and rear only cut
to match front.

DCP04101small.jpg
 

JGbronc

Bronco Maniac
Joined
Mar 30, 2007
Messages
6,211
2.5" lift and 33's are a good looking combination. Should be a good look for your Bronco. :cool:
 

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Here's my LUBR 3.5" in rear, 2.5" in front, 33x10.50x15 on 15x8 slots. You'll be fine. I do 3.5 in rear on LUBR only to get the stance I like.
 

Attachments

  • IMG_5008.jpg
    IMG_5008.jpg
    143.2 KB · Views: 105
  • IMG_5026.jpg
    IMG_5026.jpg
    121.4 KB · Views: 88

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
BTW, that's a Krawlers Edge cage that ties to the windshield frame powdercoated Wimbledon White. Only cage I'll ever buy!
 

Attachments

  • IMG_5012.jpg
    IMG_5012.jpg
    92.9 KB · Views: 73
  • IMG_5013.jpg
    IMG_5013.jpg
    106.1 KB · Views: 79
  • IMG_5028.jpg
    IMG_5028.jpg
    87 KB · Views: 74
  • IMG_5030.jpg
    IMG_5030.jpg
    110.1 KB · Views: 96

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,038
Loc.
Tucson
BTW, that's a Krawlers Edge cage that ties to the windshield frame powdercoated Wimbledon White. Only cage I'll ever buy!
You dont see topless LUBRs with inserts often and I was not a fan of the ones I saw. With that paint scheme it looks very cool! You've got me thinking now...

Ever missed not having wipers? Did you roll the real fenders or did they self clearance themselves?
 

Cortez

Bronco Guru
Joined
Jan 29, 2009
Messages
1,193
Here are the 1069's with 35's and 3.5 lift
 

Attachments

  • image.jpg
    image.jpg
    122.2 KB · Views: 52
Top