I have a '69 351W with TRW L2378 pistons with a .160 dish. I took the stock heads off and planned to do a cam and head upgrade. My question is do I have to use different pistons if I jump up to a set of aluminum heads?
All this started by taking out the C4 and swapping in a 4R70W. I thought while I had everything pulled out I might as well add some power to the 351. It has a good bottom end and I don't really need stroker power so I thought a good am and some heads would be a great upgrade.
Any thoughts?
Thanks!
All this started by taking out the C4 and swapping in a 4R70W. I thought while I had everything pulled out I might as well add some power to the 351. It has a good bottom end and I don't really need stroker power so I thought a good am and some heads would be a great upgrade.
Any thoughts?
Thanks!