• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

PA Official Unofficial MEB Round up For Sale Thread

Status
Not open for further replies.

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,020
Loc.
Hockessin, Delaware
Figured I would start a thread for anyone coming to the MEB Roundup who wants to post items up for sale or something they are looking for. You can certainly do your own thread but just figured I'd get this started. For anyone looking for new parts don't forget to call the Duffs and North East Classic Ford Part ahead of time, both can sale you a good bit on shipping.

My for sale, will add more later, to get started- custom rear tire carrier bumper $850

From when I bought it:
Custom rear bumper.* Very heavy duty.* Constructed with a beam of 2x2x.25 square tube that runs corner to corner, then wrapped in .25 plate.* Includes x2 D-ring shackle mounts, 2” hitch receiver, and x4 mounting tabs for the tire carrier.* Wrapped in “crinkle black” powder coat.* May require slight modification to install on your frame-rails!


•*** Custom swing down tire carrier.* Constructed from 1.75x.120 DOM round tube for the frame and capable of supporting a 33” tall tire with 5x5.5 pattern (might fit larger tire with modification).* Heavy duty skid plate protects the tire from departure angle obstacles.* Also includes accessory supports for a high lift jack, mounting location for RotoPax or other containers, rubber feet and anti-rattle bumpers, LED reverse lights, LED 3rd brake light, LED license plate bullet lights, and push-button release pins.* Wrapped in “crinkle black” powder coat.* **
 

Attachments

  • attachment-7.jpg
    attachment-7.jpg
    62 KB · Views: 328
  • attachment-6.jpg
    attachment-6.jpg
    104.6 KB · Views: 270
  • 97C4A961-B5C4-4C3F-9CCD-49F18FD231AD-2412-0000036F7689C5E7_zpsd8aea519.jpg
    97C4A961-B5C4-4C3F-9CCD-49F18FD231AD-2412-0000036F7689C5E7_zpsd8aea519.jpg
    236.7 KB · Views: 286
  • attachment-4.jpg
    attachment-4.jpg
    79.5 KB · Views: 237
  • attachment-5.jpg
    attachment-5.jpg
    57.3 KB · Views: 219
Last edited:

delconick

Sr. Member
Joined
Oct 7, 2009
Messages
865
we will be there for the show and can bring orders with us. message me with what you may be looking for! see you at the event!
 
OP
OP
H

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,020
Loc.
Hockessin, Delaware
Adding Corbeau Baja seats with Bronco specific brackets, used about 300 miles, like new. They bolt to the stock holes and both have sliders for adjustability. Cost over $800 with shipping and brackets. $600

Brand new 1985 Dodge Diplomat Master Cylinder (good for hydroboost or other conversion) $25
 

Attachments

  • 20170528_150801.jpg
    20170528_150801.jpg
    68.9 KB · Views: 70
  • 20170528_150813.jpg
    20170528_150813.jpg
    53.1 KB · Views: 70
  • 20170528_150904.jpg
    20170528_150904.jpg
    89.3 KB · Views: 66
  • 20170528_150917.jpg
    20170528_150917.jpg
    73.9 KB · Views: 70
  • 20170528_150931.jpg
    20170528_150931.jpg
    78.3 KB · Views: 83
  • 20170528_150935.jpg
    20170528_150935.jpg
    79.9 KB · Views: 77
  • 20170528_150927.jpg
    20170528_150927.jpg
    53.2 KB · Views: 77
Last edited:

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,122
37x12.50xx17 Goodyear MTR Kevlar tire $325
only have 1 its new still has the stickers one it
 

Attachments

  • IMG_20170408_173954063_HDR.jpg
    IMG_20170408_173954063_HDR.jpg
    104.9 KB · Views: 44
  • IMG_20170408_173908490_HDR.jpg
    IMG_20170408_173908490_HDR.jpg
    100.8 KB · Views: 53
  • IMG_20170408_173917545.jpg
    IMG_20170408_173917545.jpg
    98.7 KB · Views: 43

Mmflpa

Sr. Member
Joined
Mar 25, 2015
Messages
373
Loc.
Philadelphia, PA
Figured I would start a thread for anyone coming to the MEB Roundup who wants to post items up for sale or something they are looking for. You can certainly do your own thread but just figured I'd get this started. For anyone looking for new parts don't forget to call the Duffs and North East Classic Ford Part ahead of time, both can sale you a good bit on shipping.

My for sale, will add more later, to get started- custom rear tire carrier bumper $850

From when I bought it:
Custom rear bumper.* Very heavy duty.* Constructed with a beam of 2x2x.25 square tube that runs corner to corner, then wrapped in .25 plate.* Includes x2 D-ring shackle mounts, 2” hitch receiver, and x4 mounting tabs for the tire carrier.* Wrapped in “crinkle black” powder coat.* May require slight modification to install on your frame-rails!


•*** Custom swing down tire carrier.* Constructed from 1.75x.120 DOM round tube for the frame and capable of supporting a 33” tall tire with 5x5.5 pattern (might fit larger tire with modification).* Heavy duty skid plate protects the tire from departure angle obstacles.* Also includes accessory supports for a high lift jack, mounting location for RotoPax or other containers, rubber feet and anti-rattle bumpers, LED reverse lights, LED 3rd brake light, LED license plate bullet lights, and push-button release pins.* Wrapped in “crinkle black” powder coat.* **


I don't need any of this, but I have that armrest for ya :)
 

Mmflpa

Sr. Member
Joined
Mar 25, 2015
Messages
373
Loc.
Philadelphia, PA
My friend is selling a set of BFG Mud Terrains for $75 each. I can bring to Round up if someone wants them. 255/75 R17. 9,000 miles on 4 of them, plus an unused spare.
 

Eoth

Bronco Guru
Joined
Mar 10, 2004
Messages
1,677
Leftovers..... Would rather deliver to roundup than ship!

Power Steering Pump with hoses (6 turn) $300 SOLD
Sag Pump Bracket $20 SOLD
Alternator 1G $20
Electronic ignition conversion (Igniter II, Flame Thrower II, Ford distributor ready to drop in) $80
Flex Fan with spacer $25
Stock Bumper with brush guard $50
Intake Manifold 4 Barrel $80 SOLD
crankshaft V Belt pulley (3 Groove) $30 SOLD
Chrome Air Filter housing with new filter $15

Better/higher resolution pics available upon request
 

Attachments

  • IMG_1296.JPG
    IMG_1296.JPG
    34 KB · Views: 51
  • IMG_1295.JPG
    IMG_1295.JPG
    32.9 KB · Views: 49
  • IMG_1293.JPG
    IMG_1293.JPG
    35.3 KB · Views: 58
  • IMG_1292.JPG
    IMG_1292.JPG
    38.4 KB · Views: 55
  • IMG_1291.JPG
    IMG_1291.JPG
    33.1 KB · Views: 48
  • IMG_1290.JPG
    IMG_1290.JPG
    34 KB · Views: 49
  • IMG_1289.JPG
    IMG_1289.JPG
    40.3 KB · Views: 50
  • IMG_1121.JPG
    IMG_1121.JPG
    33.3 KB · Views: 51
  • IMG_1298.JPG
    IMG_1298.JPG
    34.6 KB · Views: 48
Last edited:

wpaeb

Sr. Member
Joined
Mar 19, 2005
Messages
429
Loc.
Clarion ,PA
Ramsey PTO winch

I have a Ramsey PTO winch setup. I'll add pictures this weekend.
I have the winch with cable, drive shaft and PTO for Dana 20.
Drive shaft needs 1 u-joint. Not sure if I have the shifter?
 

72pabronco

Full Member
Joined
Oct 18, 2009
Messages
172
I have a old style snow plow. I runs off of a hydro pump, I ran it off of a powersteering pump. It works and is all there
Asking $250
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
20,730
Loc.
NH
Pretty decent dash, uncut needs some blasting $100
pair of take off glass rear flares $50 one has a bite taken from it.
flex fan and chrome fuel pump as well
have 3 bald or near to bald 33x12.50x15's, would make god spares, not cuts, plugs....
2 original Bronco seats, real rough but if you need a starting point, here ya go
2 stock Ford wheels, one with cap
2 snow tires on Ford stock wheels 15"
will post some pics later, I am sure I have other stuff as well
 

Attachments

  • FAN.jpg
    FAN.jpg
    188.6 KB · Views: 46
  • F3.jpg
    F3.jpg
    95.2 KB · Views: 43
  • F2.jpg
    F2.jpg
    153.4 KB · Views: 43
  • F1.jpg
    F1.jpg
    189.8 KB · Views: 44
  • F.jpg
    F.jpg
    209.4 KB · Views: 43
  • D1.jpg
    D1.jpg
    94.2 KB · Views: 46
  • D3.jpg
    D3.jpg
    82.5 KB · Views: 54
  • D2.jpg
    D2.jpg
    93.6 KB · Views: 50
  • P.jpg
    P.jpg
    87.2 KB · Views: 44
  • snow.jpg
    snow.jpg
    114.3 KB · Views: 47
  • wheel.jpg
    wheel.jpg
    81.4 KB · Views: 40
  • enhance2EG785YX.jpg
    enhance2EG785YX.jpg
    109.4 KB · Views: 52
Last edited:

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
20,730
Loc.
NH
Flex fan and chrome fuel pump, wheels, seats, tires....make offers on any and all
 

68rockcrawler

Bronco Guru
Joined
Sep 18, 2006
Messages
1,417
39.5x13.50x15 Super Swamper Irok

39.5x13.5x15 Irok radial tire used, but with most of it's tread left. It's been scratched a little from rockcrawling, but doesn't have any holes. $200, delivered to the Roundup. This tire is approximately $500 new.
 
Last edited:

72pabronco

Full Member
Joined
Oct 18, 2009
Messages
172
Have at set of 3 1/2 inch Deavers coils excellent shape on truck for a few years. Looking to trade for a stock height Deavers or Wildhorses. Have a 200 inline if anyone needs anything off of it,it's free. There is a 2 groove crank pulley, good carb
 
Last edited:

gick70

Sr. Member
Joined
Jan 30, 2011
Messages
544
66-77 window door frames,brand new never used,salvaged my old ones,$225.00 for both!
 

gick70

Sr. Member
Joined
Jan 30, 2011
Messages
544
Bronco design mid rise hood,hood pins application,never used,$300.00
 

Pearlcoat

Contributor
Bronco Guru
Joined
Feb 17, 2008
Messages
1,287
Stock rear springs with 3-1/2" add a leaf - $100
Stock 2 bbl intake manifold - $20
Tailgate hinges (4 sets) - $5 per set
Dana 20 shifter with factory knob - $25
Stock bumper in box, black - $75
Stereo, JVC, AM/FM/CD - $50 (no speakers)

Deliver to the Roundup only - no shipping please.
 

Attachments

  • Leaf springs.jpg
    Leaf springs.jpg
    134 KB · Views: 35
Status
Not open for further replies.
Top