• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Intro and build thread from Canada

OP
OP
W

wizard12

Jr. Member
Joined
Jul 7, 2015
Messages
80
Wiring Update

Painless harness is 80% complete. Horn not working. Front signal lights are not working. I am sure it is a ground issue as the tail lights flash (dang fiberglass body). Was too excited to hold off on pictures as wiring is not my strong suit.

Only did the chassis section and waiting to do the engine once I get it removed/rebuilt/re-installed.


Headlights work:
47142365001_677a96e15b_z.jpg


Gauge cluster with LED lights and high beams on:
40177355223_281c7a4cbf_z.jpg


LED tail lights and license plate light:
33266928798_da77f73743_z.jpg


Gauge cluster with 4 way flashers on:
47142369011_0198b9616e_z.jpg
 
Top