• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

The 14 bolt Brake kit that just got better!

Gravel Maker

Bronco Guru
Joined
Sep 13, 2006
Messages
2,351
Loc.
Sacramento
June 26, 2017: This week we determined that we are buying in great enough quantities to LOWER the price even more! From now on we will have these kits with the dual bleeder calipers for only $283 complete ;) This is now the regular price, not a sale but permanently!

I know, how can you improve something so simple? I think we found a couple of ways ;)

We have grown a tremendous amount in the last 10 years and that growth means we can do some things we couldn't when we were smaller. One of thing is that we can go directly to the manufacturers and buy in quantity. That being said we can have them make the items as we want them!

Dual%20Bleeder%20Caliper.png


You don't have to look too closely to see our change. The caliper no longer has a Left or Right side, they have 2 bleeders so it no longer matters.

R1877-full.jpg


The second thing buying in quantity brings to the table is a lower price. We have lowered the cost enough to make the complete kit price $25 less for all of our Disc Brake Conversions are now only $303 and have the dual bleeder Caliper!

These are all your standard 3/4 Ton GM calipers so they work everywhere and we sell them individually without a core charge too!

14 Bolt Disc Brake Conversion Kit (SRW) - RuffStuff Specialties
 
Last edited:

1963hotrod

Jr. Member
Joined
Jan 15, 2015
Messages
99
Loc.
Oroville
ARE THESE FOR THE REAR OF A 1969 FORD BRONCO? iF SO i WOULD IMAGINE YOU HAVE THE BRACKETS FOR THE LARGE AND SMALL BEARING FORD ENDS. THANKS
 
OP
OP
Gravel Maker

Gravel Maker

Bronco Guru
Joined
Sep 13, 2006
Messages
2,351
Loc.
Sacramento
ARE THESE FOR THE REAR OF A 1969 FORD BRONCO? iF SO i WOULD IMAGINE YOU HAVE THE BRACKETS FOR THE LARGE AND SMALL BEARING FORD ENDS. THANKS


I do have kits for the 9" axle, they are however only weld-on brackets, I do not have a bolt-on. But you are correct that we have weld-on brackets that support both sizes of 9" tubes/bearings.


3" axle - http://www.ruffstuffspecialties.com/catalog/R2046.html
3.25" axle - http://www.ruffstuffspecialties.com/catalog/R2047.html
3.5" axle - http://www.ruffstuffspecialties.com/catalog/R2048.html

Hope this helps!
 
Top