Drivers inner rocker measurements

Hello,
A portion of my inner rocker panel has rusted off, I still have the tip/end with the large hole and 2 smaller slots, but need some measurements so i weld it back in the correct location. The drivers kick panel is gone so, no help there. I searched and was not able to find any dimensions, so what i need is a measurement from the center line of the large hole, back to where the drivers floor panel goes up to the section where the seat is mounted. I hope that makes sense. the floor cross brace is gone, so i cant use that as a measurement location. thanks in advance.

Case,
if you can post a picture and a drawing of what you want, I will measure mine this afternoon for you!
Forrest

74 Bronco Billy said:

Case,
if you can post a picture and a drawing of what you want, I will measure mine this afternoon for you!
Forrest

Click to expand...

unfortunately i cant post pictures here. need to pay and get contributor status....

Pay it with PayPal, then post a pic and a drawing.;D

in the link below, for the left inner quarter panel, the distance from the center of the large hole, to where it steps up for the floor where the drivers seat mounts.

https://shop.broncograveyard.com/68-77-Ford-Bronco-Left-Inner-Rocker-Panel/productinfo/14065/