What have you done to your Bronco today?

FordBronc · Jul 22, 2018

Took it to the car show and parked it next to my F250.

Finally located and picked up the p/s box seals for the red Bronco.

BonezTheGoon · Jul 22, 2018

FordBronc said:
Took it to the car show and parked it next to my F250.

Finally located and picked up the p/s box seals for the red Bronco.

That '69 Fastback Mustang looks pretty smokin'!!!

Today I finished drilling my clutch pedal arm for my NV4500 hydraulic clutch push rod. Yesterday right around dark my trusty drill finally died. Bought a new drill today and finished the job just now.

FordBronc · Jul 22, 2018

It was a nice car, I hope to have the red Bronco at the next one.

BonezTheGoon · Jul 22, 2018

I just now got done converting the breather on my Dana 20 so I can plumb it up into the engine compartment where I have a breather box with filters. ;D

mattyq17 · Jul 25, 2018

mattt said:
Does that help strengthen the floor to kick panel joint? I've never seen exotic floor plates like that. His cage looks like the one my buddy and I built. Looking good!

Yes mattt, its to strengthen the floor to kick panel joint as well as tie it to the body mount. Here is the one from my build.

Tugross302 · Jul 27, 2018

Got my new license plate today. Car show tomorrow

Tugross302 · Jul 27, 2018

Forgot the pic.

FordBronc · Jul 27, 2018

Guess Ward was a little hard on the Beaver, last time out. So after I replaced my blown pitman arm shaft seal...during the bleeding procedure (motor running part) I discover I have a crack that during full lock to lock it is spraying p/s fluid every where.

Remos69 · Jul 28, 2018

Started installing serpentine setup from one of the vendors and found I was missing a package of bolts. Able to utilize ones we had in the parts bin except for a 7/16 x 6.5. Now awaiting parts again. Spent the evening looking for a rear sump dipstick online for my 351 as our local Auto parts store are as useful as......

tasker · Jul 28, 2018

drove it to work, gave it a bubble bath!

sprdv1 · Jul 28, 2018

Tugross302 said:
Forgot the pic.

like that a lot...

sprdv1 · Jul 28, 2018

tasker said:
drove it to work, gave it a bubble bath!

enjoy now right, that W word isn't too far around the corner...

BronCowie · Jul 28, 2018

tasker said:
drove it to work, gave it a bubble bath!

Nice shot... that there is one happy Bronco!

tirewater · Jul 28, 2018

Removed the passenger side fender & air box. I can't believe someone thought this design was a good idea...and didn't bother to redesign it during the 11 year run. I suppose I shouldn't complain since it lasted 42 years.

miikee73 · Jul 28, 2018

Bent up a bracket for the reverse light switch on my new install 4spd toploader. Old School Cool.

BRONCITIS74 · Jul 29, 2018

Drivers side outside door handle didn't work. Took it all apart, tightened the handle, adjusted one linkage rod, and lubed the latch inside the door, and son of a gun, it worked.

miikee73 · Jul 29, 2018

Added LED lights to the reverse lights. Tinted windows and stock mirrors, can't see crap. If nothing else they'll see me.

sprdv1 · Jul 29, 2018

Nice brother...

Lawndart · Jul 29, 2018

Finished getting her back together. I couple of heat cycles and an oil change. All seems good, so I am driving it. I know you guys like pics.

brewchief · Jul 29, 2018

I spent most of yesterday with a buffer trying to make my Bronco a bit more presentable for the Bronco takeover at Silver Lake next weekend, the 44 year old paint is pretty rough but it does have some shine to it now.

What have you done to your Bronco today?

Bronco's, yea I have a couple.

Attachments

Full Member

Bronco's, yea I have a couple.

Full Member

Bronco Guru

Attachments

Sr. Member

Sr. Member

Attachments

Bronco's, yea I have a couple.

Attachments

Sr. Member

all knowing of nothing

Attachments

REBEL

REBEL

Old Timer

Sr. Member

Attachments

Shadetree Guru

Attachments

Full Member

Shadetree Guru

Attachments

REBEL

Sr. Member

Sr. Member

Attachments

Similar threads