• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

removeable front clip info needed

Builtnotbought0

Full Member
Joined
Sep 24, 2017
Messages
156
Loc.
Belen NM
Ive searched and cant find anything. Can someone link me to some info on having a removeable front clip...aprons and core support?

I know I saw someone do it, I just cant find any info thru the search option.

Please and thanks.
 

bronkenn

Contributor
Bronco Guy
Joined
Apr 27, 2017
Messages
2,662
Loc.
Southeast Ohio
I did it on mine and really like it. Let me know if I can help with any info. Ken
 

Attachments

  • P1010009 (2).jpg
    P1010009 (2).jpg
    91 KB · Views: 138
  • P1010011 (2).jpg
    P1010011 (2).jpg
    61.3 KB · Views: 121
  • P1010012 (2).jpg
    P1010012 (2).jpg
    53.4 KB · Views: 111
  • mock up1.jpg
    mock up1.jpg
    92.6 KB · Views: 119

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
20,735
Loc.
NH
I have one on my glass tub project as well...makes it a ton easier working on some stuff. mine was a one off made by Mike that used to own Bronco Design..I had to cut the cowl off to match my Kentrol tub. Ask any questions or I can get other pics...
 

Attachments

  • enhanceS6DEYELI.jpg
    enhanceS6DEYELI.jpg
    78.3 KB · Views: 46
  • clip1.jpg
    clip1.jpg
    64.4 KB · Views: 43
  • enhanceISSVE1V2.jpg
    enhanceISSVE1V2.jpg
    79.2 KB · Views: 44
  • enhanceKIINY5HT.jpg
    enhanceKIINY5HT.jpg
    54.4 KB · Views: 45
  • enhanceQ2RUQN4E.jpg
    enhanceQ2RUQN4E.jpg
    273.9 KB · Views: 50
  • enhanceCID529DI.jpg
    enhanceCID529DI.jpg
    177.9 KB · Views: 61
  • enhanceTVDU0EV5.jpg
    enhanceTVDU0EV5.jpg
    175.2 KB · Views: 54

blue78

Jr. Member
Joined
Dec 28, 2014
Messages
112
Loc.
Annapolis Area
I did mine as temovable as well, I'll post some pics when I get home but essentially it is just a lot of lining up and drilling. It made painting and putting the motor in so much easier. I'll post pics when I get home.
 

blue78

Jr. Member
Joined
Dec 28, 2014
Messages
112
Loc.
Annapolis Area
Here are the pics. If I were doing it again I would be more deliberate with the drilling, spacing is not as even as I would like but it does the trick. I made everything removable. The only thing i welded was the inner skirts to the rad support, everything else bolts on and off.

Since I may have to pull the motor back out (I'm praying that I don't have to) this may prove to be a smart choice.

Kyle
 

Attachments

  • IMG_20180331_145914259.jpg
    IMG_20180331_145914259.jpg
    107.4 KB · Views: 64
  • IMG_20180331_145928566.jpg
    IMG_20180331_145928566.jpg
    112.1 KB · Views: 59
  • IMG_20180511_185536064.jpg
    IMG_20180511_185536064.jpg
    110.5 KB · Views: 61
  • IMG_20180511_185550537.jpg
    IMG_20180511_185550537.jpg
    117.5 KB · Views: 54
Top