• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

Z Bronco

Bronco Guru
Joined
Mar 17, 2007
Messages
1,138
Set the the crank at 10degrees BTDC and installed the new distributor. Today it is new spark plugs and wires.
 

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
That is a cool top. Where did you get it? Are they available for a 1/2 cab cage?

It actually wraps around the roll cage.
It was a job Donnie out in Stockton did for me. I didn't want the kiddos getting to much sun on long trips.
ImageUploadedByTapatalk1463246601.379502.jpg ImageUploadedByTapatalk1463246633.295845.jpg
 

El Kabong

Contributor
Driving stuff Henry built
Joined
Oct 8, 2009
Messages
1,487
It's been a busy couple of weekends. I put on the rear sump oil pump & pick up, along with the massaged pan on. It's a 400, so everything is tight. New clutch. 1st time install of the NP435 (with J t-case attached). Heavy. Lots of floorboard cutting. The throwout arm slipped off the fulcrum during the install, so the trans had to be removed & re-installed. :( Installed twin sticks. Gearbanger too. New battery. Got it running only to find the fuel pump leaking, so a new pump went in as well. And then I finally got to drive it. ;D
 

darrell82

Full Member
Joined
Apr 15, 2015
Messages
161
Went on a date with the wife in it and the passenger side 9" axle seal quit sealing.

Sent from my SAMSUNG-SM-G850A using Tapatalk
 

5001craig

Contributor
Bronco Guru
Joined
Nov 3, 2013
Messages
1,180
Pulled the engine/trans/TC then had a fun day of stripping 46 year old rust proofing and wire wheeling the frame. Then pulled the front axle shafts and rear diff. Will be sandblasting the rearend this week and getting gears/Grizzly installed in the front. Didn't take any pics until I loaded the frame on my trailer (on top of another trailer). Then I put my '52 in the Bronco spot for the time being.

WWMlSxBSa3w9sUeljKG_LU3EFmnWbSW7rCqlwaCsSHgN3BWs-J-D3i4qEXOI9rpjfL-RmdTZfNomc_q3LOMGnBwCZt06XrTKNEU5xz5jU77kIeDm7-fTze1Z6J73UlhrfO5EzhSX6IYfibfiX43t9L8_a2X1wmTJVJeLKHK8vHbQ7WtgpgbVJJPJQwTxxC7DHh0GFCxgAE0b-MUaQkzQGbeqA01oQexTJhfG6tdBiVABuHxoVLkmjiGR1Tsm3R40TYsG2cB7LWppEe_EtlQ3DWMbMnMRxYloXEcufDwbfBc2eSByeJKl3FStLBmNpnl3fjVM5bK1g-9GDLoymLzn6GxKJvTufFkCnVvmHU4GXHyNy2fJGOzEEtoGFkrqUN_TatKTzcHER2h7hSW4aGM7WcrbEYYhbFhT7Eahk5IuKYsCRjU_rKkrp0CJc4-ayoPLg7Rjd330qzzei8BfL1f_HlXn4--nPp9lx0lMQiE0ufLEP_oQANWIeh19QYZuSaPqFrx5K3I9ZpwF-TjQ2oaF1lkrMB7qf9CAbIrjp-gu8IJRpzHoDFvzyQ2z4SbJdQXeIvUa21kFwFNijl12lqbOsogPD76s2pik=w1750-h985-no


TVXrge5YzJkEC4CRoWehUmSntj6VxD9gktYrkd7jauBmBmnz7JN8CxDe06LNeiPzMgGTw2Gw5exwGF3S3_CPLxfUeaRhJc-m2YE7Ds_fHPXu1HWOmYGWwzCoZZ5VL2FkoJAyP4ZoXzkc_4LSbCYieWvJwSfdDZChL3jdGX9q4XS5p7Ls3OHg98B5NwyIwcVRqcY-81Y_zPhzsa2uht1H4vh2x2NOccTxRMSYpenH7Hj0S4ho9NjJ3mYNg-dBNxc9dcEUjXQgnXXSvxUdrRY2wYcDjt8nT84m6Ci1TmTp06GIvsfq5_a_BxVS0lp8n8XZXp6ELNjZE3JNxi7swosB6sC_hqe36RlsZiCnXJpSYhkn1euHYHQM63L-wENuPaRnNrt7pgCxCRW6NacaNC8JRvO71bOw7Xn9jXRNMi9aDfKvqt7JNgkRTgmnqhxGt8L1AMxZAbY3JyzK5fpnFkMCbhT5Kro-1AIHjhX_YP0hbQBPxo8T8aVBEHtoL9c_9oECCFfWW4r9AZL54JSkVphRMxrk-ekYae8pBONoOBEre7I35zAAsptJLhthxv8mNuJ5xxd-2ZAbW_1b8KqHn7kblUAxOaxyQuEa=w1750-h985-no


QflLWBcnmEeqvm-olpFnnvp-8fIY43hFjAk4JZn1qyx76A1XqS1RrFejhWrG9_tZvbzS_ByyszTSnwRNdtyziBdMA4rixyeoL8NcRg6leKDhJEEo6oZ1xyvr3tJRNB_xK5HA5dlMio3G3jGKcfmoY7co-BPuDHDKd2yq5NoBttSS3eVrm1b7HWed3ZNPrp3HXbBb9qCJxxVgR1zjxfJpEcgAIS_vogWMJ4wmg-8ycdEhgaibWN_fcQGWytjREXoSBeUB6lMMLzP3MuZcWPfOAD9xRktawYu0_0ctuDQyerBDQI3V9AdY2MoiPuhMtEwGbnj3cUrydpbemFxmsJdpPFZPunzXE_cfZ3cxUCeVwLGrnYBah49EpUevwbFxf6j_3Uxv-xUEmTVsIOscqvBAnJSLNT9PT8QBDRy-OrJOA8QOCOrck7x7RZYdtszBVdNyYxtE1HqwsjHhm6ZjJwfwsX9KbDmlDwzBbuYkolJ-rJ308a94T6goKGtLUdRPom4YrJXWecVPV4TYZTZt-6WTo7ZB34QJW8Qq2CpewbTogxF6BqaEzE6qD1Ag-8JcV6XBCoubVy-OjnsscKVpsx-kzLnDcfFuQ6TZ=w1750-h985-no
 

Bdhand

Contributor
Sr. Member
Joined
Aug 15, 2015
Messages
712
Rear seat

Got the wood replaced on my rear seat! Now to just get them recovered!!!
 

Attachments

  • image.jpg
    image.jpg
    84.3 KB · Views: 53

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,968
Nice Farmall Cub! Learned to drive on one of those hauling a two row planter around. My feet didn't reach the peddles though, Dad would have to push the clutch in by hand and get me rolling, then he'd hop on the planter. If I got in a bind and needed to stop quick I could push in the kill switch with my left toe. Great memories!


Pulled the engine/trans/TC then had a fun day of stripping 46 year old rust proofing and wire wheeling the frame. Then pulled the front axle shafts and rear diff. Will be sandblasting the rearend this week and getting gears/Grizzly installed in the front. Didn't take any pics until I loaded the frame on my trailer (on top of another trailer). Then I put my '52 in the Bronco spot for the time being.


QflLWBcnmEeqvm-olpFnnvp-8fIY43hFjAk4JZn1qyx76A1XqS1RrFejhWrG9_tZvbzS_ByyszTSnwRNdtyziBdMA4rixyeoL8NcRg6leKDhJEEo6oZ1xyvr3tJRNB_xK5HA5dlMio3G3jGKcfmoY7co-BPuDHDKd2yq5NoBttSS3eVrm1b7HWed3ZNPrp3HXbBb9qCJxxVgR1zjxfJpEcgAIS_vogWMJ4wmg-8ycdEhgaibWN_fcQGWytjREXoSBeUB6lMMLzP3MuZcWPfOAD9xRktawYu0_0ctuDQyerBDQI3V9AdY2MoiPuhMtEwGbnj3cUrydpbemFxmsJdpPFZPunzXE_cfZ3cxUCeVwLGrnYBah49EpUevwbFxf6j_3Uxv-xUEmTVsIOscqvBAnJSLNT9PT8QBDRy-OrJOA8QOCOrck7x7RZYdtszBVdNyYxtE1HqwsjHhm6ZjJwfwsX9KbDmlDwzBbuYkolJ-rJ308a94T6goKGtLUdRPom4YrJXWecVPV4TYZTZt-6WTo7ZB34QJW8Qq2CpewbTogxF6BqaEzE6qD1Ag-8JcV6XBCoubVy-OjnsscKVpsx-kzLnDcfFuQ6TZ=w1750-h985-no
 

5001craig

Contributor
Bronco Guru
Joined
Nov 3, 2013
Messages
1,180
Nice Farmall Cub! Learned to drive on one of those hauling a two row planter around. My feet didn't reach the peddles though, Dad would have to push the clutch in by hand and get me rolling, then he'd hop on the planter. If I got in a bind and needed to stop quick I could push in the kill switch with my left toe. Great memories!
That's funny. I love my Cub. I jokingly say it's one of the six things I got out of my divorce. Don't use it much anymore but just can't part with it. I love starting it by hand and seeing the stares from my friends. Mainly use it to grade our road these days that is about 200 yards long. I thought it was nice to put it in the Bronco spot for a few days. :cool:
 

66WarPony

Full Member
Joined
Nov 16, 2010
Messages
230
Rebuilt the front drums, bled the brakes.

Present: '69 4.1L I6, Aussie 2V, Weber 38/38; Up next: CI Headers, Dual exhaust
 

5001craig

Contributor
Bronco Guru
Joined
Nov 3, 2013
Messages
1,180
Steam cleaned the frame (again...), blasted the rearend prior to welding-out and cleaned the frame prior to welding it out--step one of four on the frame.

gili6svKA4zkVpK_5qLqNVX3u5uzJeHffsI6vlMHQnd9V7AQb5xPLMgRTmjTOZXRVlQpkZKX3jXO_u72_pJj9llonmICU7PaF4mZEiJ5DGxoodig_sTcW6YiTZ55F135x_ijzyJtANkYZa2E1gG7GMwh6hS-BDUw-EtB9GoWXsdf39qeOs-9DpS6fA9_ZP7CB0oSuXujODbyRt61l4KhqImCMZh0zqUCdjIImdWtrr2Ek3PZSCVifrs-iVhqWmzYyGePvSrChsEYzs46ysTAZIb5pkRcZuSv8bYxvIBV-tJ63Tmkb7ZxnQbo64W9BEAhN6F2ZONbDmBFfPXDQIpMvZCIV3Qwa3KJPrSxW_JSRszMQfLtAJVkwnLKVv8txfb7G7461wkz1ODxiSAmVv2sZFrQmaadg_tAaX2heWK5yejm4RXm2eiyAjoAUODqRJJxdnqk2_ua8-2NFqKBdQPB73hbm72OV6gqUo34RvKBrv6zMobBUVU_E-R-y9J_njmr-wpqxsyqgQvEL5HUk7ZHf-Pk30I1lGHrv7qocKtzR9otPi-q8sBWX63XLqqwKAodge_GJe08OyKp3KKSPd2pXeX_Ykh21PCS=w1750-h985-no
 

76YETI

Contributor
Sr. Member
Joined
May 27, 2015
Messages
856
Loc.
KC METRO
Nope, but I have thought about it...I found an old thread which had pictures of this build. I tried to PM the owner of the tread on this site with no luck. We ran into a lot of little problems since we were winging it from pictures. I can probably do one...
 
Top