PA OEM Y-pipe wanted

Sporto · Jun 10, 2017

I know this is a long shot, but does anyone have a decent single exhaust Y-Pipe laying around that would be interested in selling? I have the stock manifolds, and I would like to see if I can fabricate a single exhaust system. A good OEM Y-pipe is the one part that I will need to do this properly. I will be at the Round Up or if you're not local, I will pay to ship.

Thanks!

Rich

Joe473 · Jun 10, 2017

I have one. It's in central NJ

Sent from my SM-G900V using Tapatalk

904Bronco · Jun 10, 2017

I just took off a factory y-pipe with factory CAT, replacement muffler and tailpipe from a 77 Bronco. But shipping from CA would be excessive

Sporto · Jun 10, 2017

Right you are 904Bronco! Thanks

Sporto · Jun 10, 2017

Joe473 said:
I have one. It's in central NJ

Sent from my SM-G900V using Tapatalk

Hey Joe473,
Where in Jersey are ya? Are you going to the Round Up? I'm interested for sure!

Rich

bronconut1 · Jun 10, 2017

I have several $110 shipped

broncodriver99 · Jun 11, 2017

Hey Sporto, what year? With or without the cast iron spacer?

They are available repro. I have had my hands on one of the Y pipes from this manufacturer and they are as close as it gets. Everything past the muffler from them is not stock buy the Y pipe, intermediate, and muffler is pretty darn close.

Depending on whether you have the later manifold with the spacer/riser?

Stock 2"

https://www.npdlink.com/store/products/bronco_y_pipe_exhaust_2_inch_diameter-201838-80527.html

https://www.npdlink.com/store/products/bronco_y_pipe_exhaust_2_inch_diameter-201840-80527.html

They also make it in 2-1/4"
https://www.npdlink.com/store/products/bronco_y_pipe_exhaust_2_1_4_inch_diameter-201839-80527.html

https://www.npdlink.com/store/products/bronco_y_pipe_exhaust_2_1_4_inch_diameter-201841-80527.html

PA OEM Y-pipe wanted

Sporto

Sr. Member

Joe473

Sr. Member

904Bronco

Bronco Guru

Sporto

Sr. Member

Sporto

Sr. Member

bronconut1

Bronco Guru

broncodriver99

Bronco Guru

Similar threads