• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Serpentine conversion help

RustyShackelfor

Bronco Guru
Joined
Nov 30, 2009
Messages
1,593
Loc.
Centerville, TN
the pump is there, its circled.

serpconv1.jpg
 

RustyShackelfor

Bronco Guru
Joined
Nov 30, 2009
Messages
1,593
Loc.
Centerville, TN
What is the remanant of the high pressure ps line hooked to? It seems to be in the same area as the feed line from the reservoir, but it doesn't make sense that the seller would remove the pulley if the pump is there. It's hard to tell in the pics...

i usually remove all the pulleys because of the way i ship the parts. packs up good.
 
Top