TN Many Parts For delivery to SC

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 20, 2016

• #1

This is for delivery to the super celebration, I will ship only if they do not sell after I return.

I will need a deposit or payment in full to get the parts loaded for the trip.
I have returned home too many time for no shows.

email me is the best way to contact me.

Snap-On CT0 3/8" battery impact impact only not battery or charger- Free to good home

Dual wheel valve tire extenders ss brait, pickup for my RV but wont work - $10 for the pair

Water proof cases size about 10"x9" see link below

S3 cases Model 500 $15 each (I have about 10)
http://www.s3cases.com/s3-case-line/model-t5000/


Wristed Radius Arm ( cheap flex) $125

Mustang Computer A3M1 there are the service replacement for the A9L - $140 each

Cast manifolds from an 88 T-Bird they have o2 bungs built in and ball flanges -passengers side is a tight fit to the frame but they can be made to work, i will throw in an old exhaust system I had for it includes a flow master muffler $20

Pair of Dick Cepec Lights about 6" with chrome conduit - $40

Pollak tank switching valve part number 42-149 - $15

 

Attachments

• 
  IMG_20151101_102123168_HDR.jpg

  82.1 KB · Views: 94
• 
  IMG_20160313_133846308.jpg

  58.5 KB · Views: 70
• 
  IMG_20160313_133830219.jpg

  59.3 KB · Views: 74
• 
  IMG_20160313_133643041.jpg

  77.4 KB · Views: 100
• 
  IMG_20160228_125216246.jpg

  73.1 KB · Views: 91
• 
  IMG_20160228_125209939.jpg

  76.8 KB · Views: 79
• 
  IMG_20151101_102212034.jpg

  75.1 KB · Views: 99
• 
  IMG_20151101_102132665.jpg

  40.9 KB · Views: 72
• 
  IMG_20160319_105731332.jpg

  78.6 KB · Views: 89
• 
  IMG_20160319_105716505.jpg

  77.1 KB · Views: 94
• 
  IMG_20160313_134016477.jpg

  162.5 KB · Views: 92
• 
  IMG_20160313_133930731.jpg

  90.5 KB · Views: 74

Last edited: Mar 24, 2016

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 20, 2016

• #2

more stuff


D2 Model 3 bender
1.5” 5.5R die M3R100226 180 degree bend.
1” 3R die M3R100194 180 degree bend.
¾ 2.25R M3R100182 180 degree bend.
Model 3 Floor Pedestal Stand

all bender stuff will not separate $800 SOLD


2 piece 9" axle truss new $25

Ruff Stuff 1 piece axle truss for full size 9" ( will not fit an EB axle) $100

Tank switching valve, media blasted $ 10 sold

Snap-On 10 ton Jack Stands model ?A522 ( cant read the first digit) range 18-31" - $120 sold

 

Attachments

• 
  IMG_20150329_124905257_HDR.jpg

  55.4 KB · Views: 44
• 
  IMG_20150326_180316095.jpg

  93.2 KB · Views: 51
• 
  IMG_20150326_180306336.jpg

  90.8 KB · Views: 52
• 
  IMG_20150329_124857600_HDR.jpg

  102.5 KB · Views: 54
• 
  IMG_20160319_120420083.jpg

  79.3 KB · Views: 54
• 
  IMG_20160319_120441919.jpg

  75.2 KB · Views: 64
• 
  IMG_20160228_124653372.jpg

  58.5 KB · Views: 77
• 
  IMG_20160228_124633757.jpg

  76.5 KB · Views: 71
• 
  IMG_20160228_124902557.jpg

  53.4 KB · Views: 62

Last edited: Apr 5, 2016

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 20, 2016

• #3

more parts for sale

Tractor rubberized light about 4" - $5

Mustang EEC-IV Remote black TFI module with heat sink condition unknown - $5

1989-1992 Mustang Harnesses
Harness #1 Main harness only - $75
Harness #2 Main & Injector harness $100
Harness #3 Main, Injector 7 O2 harness $125

Mustang Computer bracket $5

3 Repair manuals, these were in the shop a bit of shop grime on them
Chiltons truck & van 1971 -1978
Chiltons 1966-1981 bronco
Chiltons jeep 1945- 1987
all 3 $15

Cage rear dual Shock mounts bolt on - $125 sold

New Air Bag from a Crown vic tan make your own security system ;D - $5

 

Attachments

• 
  IMG_20160319_110333570.jpg

  61.5 KB · Views: 46
• 
  IMG_20160319_110243263.jpg

  81.6 KB · Views: 47
• 
  IMG_20160319_105905021.jpg

  67.1 KB · Views: 51
• 
  IMG_20160319_105842027.jpg

  86.5 KB · Views: 54
• 
  IMG_20160319_105802108.jpg

  71.2 KB · Views: 42
• 
  IMG_20160319_105746892.jpg

  48 KB · Views: 42
• 
  IMG_20160319_111442639.jpg

  41.5 KB · Views: 49
• 
  IMG_20160319_111305735.jpg

  63.8 KB · Views: 60
• 
  IMG_20160319_120108610.jpg

  96.4 KB · Views: 57
• 
  IMG_20160319_111232472.jpg

  79.2 KB · Views: 55
• 
  IMG_20131130_080931.jpg

  81.2 KB · Views: 56

Last edited: Apr 13, 2016

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 20, 2016

• #4

But that's not all folks

1991 Car wiring diagrams ( blue one you get all 4) - $50

1992 Power control Emissions diagnostics manual ( Black One ) $50
this is the manual RJM & probst used for most of the diagrams you see published.

 

Attachments

• 
  IMG_20160319_110004784.jpg

  62.4 KB · Views: 32
• 
  IMG_20160319_120202859.jpg

  77.8 KB · Views: 35
• 
  IMG_20160319_120325957.jpg

  56.8 KB · Views: 29

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 20, 2016

• #5

reserved for more stuff

warn lock out hubs used all parts there these were my trail spares $40

Bailie Built Bilt cool engine fender stainless vents new $75 sold

Spring Hangers for the rear leaf springs $40

Wild Horses LED Lights $75 for the pair
http://www.wildhorses4x4.com/product/NITECRAWLERLEDLightBar4inFlood

Ford Distributor Boot $5.00 SOLD

 

Attachments

• 
  IMG_20160320_141323596[1].jpg

  67.8 KB · Views: 35
• 
  IMG_20160320_141825810[1].jpg

  30 KB · Views: 36
• 
  IMG_20160320_141816059[1].jpg

  56 KB · Views: 36
• 
  IMG_20160320_142146691[1].jpg

  75.2 KB · Views: 33
• 
  IMG_20160320_141558451[1].jpg

  60.3 KB · Views: 35
• 
  IMG_20160320_141550634[1].jpg

  50 KB · Views: 36
• 
  IMG_20160320_140130255_HDR[1].jpg

  112.3 KB · Views: 54

Last edited: Mar 25, 2016

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 20, 2016

• #6

reserve again........

 

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 21, 2016

• #7

all pm are answered and parts I have been paid for are marked sold

if I missed you shoot me another email

 

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 24, 2016

• #8

updated paid and answered emails / PM's
if I missed you send again

 

FRANKO289

Contributor

Bronco enthusiast

Joined

Jul 7, 2008

Messages

6,807

• Mar 24, 2016

• #9

I take the Bailie Built Bilt stainless vents for $75 !!
they are one of the orig. first gen. design !?!

how long ago did you get them ??

 

M

mattt

Bronco Guru

Joined

Sep 23, 2006

Messages

3,810

• Mar 24, 2016

• #10

I'll get in line for the ss fender vents.

 

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 24, 2016

• #11

FRANKO289 said:

I take the Bailie Built Bilt stainless vents for $75 !!
they are one of the orig. first gen. design !?!

how long ago did you get them ??

Click to expand...

They have been sitting there awhile, can't remember when I got them

 

FRANKO289

Contributor

Bronco enthusiast

Joined

Jul 7, 2008

Messages

6,807

• Mar 24, 2016

• #12

ransil said:

They have been sitting there awhile, can't remember when I got them

Click to expand...

well ..il take the vents and 2 of the S3 boxes so we don't have to brake a benjamin !! lol ;D

 

OP

OP

R

ransil

Bronco Guru

Joined

Sep 6, 2003

Messages

8,122

• Mar 27, 2016

• #13

bump for the weekend

starting to pack stuff, claim your parts before its too late.

 

E

EODflagg

New Member

Joined

Oct 3, 2014

Messages

36

Loc.

ladson

• Apr 15, 2016

• #14

Do you still have the warn hubs and if so how to ship to 29456???