• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Since the 'upgrade' New Posts problem

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I clicked on the New Posts link over two hours after the last time and got this:

vBulletin Message
This forum requires that you wait 10 seconds between searches. Please try again in 10 seconds.

I have done no other searches.
This is not the first time it has happened.
 
OP
OP
sykanr0ng

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
All since the update, sorry if that was not clear.

All after at least two hours since the last search for new posts.

No other searches done within that time.

When I posted that was the third time.

It is an intermittent problem, the worst kind.
 

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,753
Loc.
Phoenix, AZ
Does this continue to be a problem for you? I can't replicate it at all on my end.
 
OP
OP
sykanr0ng

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I have found the problem.
The link for 'New Posts' allows itself to be double-clicked which it then interprets as two searches within less than 10 seconds.

It did not accept double-clicks before the upgrade.

I have a mouse with switches that seem to be failing which must be causing more than one click when I only click once, I had the same mouse before as I have now.
 
Top