1966 Bronco U-15 Wagon
Complete frame off restomod. Has approximately 200 miles on build. Bronco was purchased out of Idaho in 2012
and I've attempted to compile a list of modifications below. More pictures available.
Frame:
Frame and both axle housings were stripped to bare metal and painted with POR15
Both axles are original to truck
Warn locking hubs
Front disc brake conversion
Rear drums rebuilt and all new
braided extended stainless steel braided brake hoses (master cylinder to hardline, rear frame to rear axle and front brake hoses)
Ford superduty Hydroboost w/ Dodge Diplomat master cylinder
2 ½” suspension lift
8” original style wheels
New LT33X10.50R-15 BFGoodrich Mud-Terrain T/A KM2 C
Ford dogdish hubcaps
Original spare mounted inside tailgate
Driveline:
2011 Ford 5.0 Coyote
2004 4R70W rebuilt w/ new torque converter
Baumann electronic transmission controller
Sean Hyland Power steering pump conversion for 5.0
New ford explorer radiator w/ internal transmission cooler, and Taurus electric fan
Original Dana 20 transfer case, rebuilt
WH 23 gallon tank with in-tank electric pump
Fuel pressure regulator
Handbuilt exhaust headers
Original driveshafts
Front driveshaft not installed or sized
TBP replacement track bar w/ bushings
TBP adjustable drag link
Polyurethane motor mounts
TBP AOD transmission adapter
New transfer case mount
New brake hardlines
New fuel hardlines
Body:
New TBP front fenders
Original grill shell
WH Highlander fiberglass hood
New floorpans driver and passenger side
New TBP driver rocker panel
New BCBroncos body mounts and hardware
New taillight lenses
Original hardtop, doors, tailgate, and windshield frame
Reworked rear quarter panels to include front fender grafting
All new tinted glass
All new rubber seals
Door felt kit
Aftermarket original bumpers which have been narrowed and reinforced for hitches
TBP 8 point family cage w/ modifications
TBP electric synched windshield wipers and new arms
Soft top included
H4 Halogen headlight conversion w/ heavy duty wiring
Paint Base/Clear in original 1966 Ford Poppy Red
Interior:
Recovered front and rear seats
Integrated shoulder harness seat belts for front
Retractable lap belts for rear
Fabricated Jerry can mount for xx Jerry can storage
Stock gauge cluster with WH voltage gauge
JB Fabrications Twin Sticks
Smoothed dash
Raptor bedliner interior
Interior fire extinguisher
Tilt steering column w/ column shifter
Cable shift linkage
Northwest Autowire Wiring Harness w/ 12 fuse panel
All electronics contained in glove box
TBP steering wheel and adapter
Outstanding Work:
Custom tune for the 5.0
Resize front driveshaft
A/C (motor is set up for A/C with compressor in place)
If you have any questions send me PM. Serious inquiries only, no tire kickers please.
Local pick up only or buyer responsible for arraigning and paying for shipping. Bronco is located in Oviedo, FL.
Thanks for looking.
Complete frame off restomod. Has approximately 200 miles on build. Bronco was purchased out of Idaho in 2012
and I've attempted to compile a list of modifications below. More pictures available.
Frame:
Frame and both axle housings were stripped to bare metal and painted with POR15
Both axles are original to truck
Warn locking hubs
Front disc brake conversion
Rear drums rebuilt and all new
braided extended stainless steel braided brake hoses (master cylinder to hardline, rear frame to rear axle and front brake hoses)
Ford superduty Hydroboost w/ Dodge Diplomat master cylinder
2 ½” suspension lift
8” original style wheels
New LT33X10.50R-15 BFGoodrich Mud-Terrain T/A KM2 C
Ford dogdish hubcaps
Original spare mounted inside tailgate
Driveline:
2011 Ford 5.0 Coyote
2004 4R70W rebuilt w/ new torque converter
Baumann electronic transmission controller
Sean Hyland Power steering pump conversion for 5.0
New ford explorer radiator w/ internal transmission cooler, and Taurus electric fan
Original Dana 20 transfer case, rebuilt
WH 23 gallon tank with in-tank electric pump
Fuel pressure regulator
Handbuilt exhaust headers
Original driveshafts
Front driveshaft not installed or sized
TBP replacement track bar w/ bushings
TBP adjustable drag link
Polyurethane motor mounts
TBP AOD transmission adapter
New transfer case mount
New brake hardlines
New fuel hardlines
Body:
New TBP front fenders
Original grill shell
WH Highlander fiberglass hood
New floorpans driver and passenger side
New TBP driver rocker panel
New BCBroncos body mounts and hardware
New taillight lenses
Original hardtop, doors, tailgate, and windshield frame
Reworked rear quarter panels to include front fender grafting
All new tinted glass
All new rubber seals
Door felt kit
Aftermarket original bumpers which have been narrowed and reinforced for hitches
TBP 8 point family cage w/ modifications
TBP electric synched windshield wipers and new arms
Soft top included
H4 Halogen headlight conversion w/ heavy duty wiring
Paint Base/Clear in original 1966 Ford Poppy Red
Interior:
Recovered front and rear seats
Integrated shoulder harness seat belts for front
Retractable lap belts for rear
Fabricated Jerry can mount for xx Jerry can storage
Stock gauge cluster with WH voltage gauge
JB Fabrications Twin Sticks
Smoothed dash
Raptor bedliner interior
Interior fire extinguisher
Tilt steering column w/ column shifter
Cable shift linkage
Northwest Autowire Wiring Harness w/ 12 fuse panel
All electronics contained in glove box
TBP steering wheel and adapter
Outstanding Work:
Custom tune for the 5.0
Resize front driveshaft
A/C (motor is set up for A/C with compressor in place)
If you have any questions send me PM. Serious inquiries only, no tire kickers please.
Local pick up only or buyer responsible for arraigning and paying for shipping. Bronco is located in Oviedo, FL.
Thanks for looking.