She's Alive.
So after a little wiring to connect my starter, coil, and new 4g alternator I was ready to fire up the motor my grandpa and I rebuilt almost 2 years ago. Got all excited turned the key annnnd, click.
Fast forward after checking battery, wiring, grounds, etc., it turned out to be corrosion on the jump wire from the starter mounted coil to the starter itself. Cleaned that up turned the key annnnnd, well she turned over but wouldn't fire.
Fast forward again now checking all my wiring finding nothing wrong. Then going to borrow a voltmeter from my father-in-law checking all my wiring again finding nothing wrong. Thought i wasn't getting spark but actually I was so now what. So I forgot to cap off the vacuum lines on the carb. Plugged those up, turned key again, cranked for about 10 seconds then...
[youtube]ZbFbpTQSJlg[/youtube]