• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

CA Jeff’s bronco graveyard power steering box

Status
Not open for further replies.

350hertz

Contributor
Bronco Guru
Joined
Oct 11, 2011
Messages
1,545
This Delphi style box has correct sector shaft you can you use your stock pitman arm not the little weak small pitman that usually has to be teamed to install good upgrade on steering box or add power steering to your bronco
 

Attachments

  • 97CECCBC-575E-4D2F-94E7-C59A70FC28C2.jpeg
    97CECCBC-575E-4D2F-94E7-C59A70FC28C2.jpeg
    181.9 KB · Views: 117

GStaudt

New Member
Joined
Feb 24, 2013
Messages
35
Loc.
Honolulu
Hi,

I'm interested in this box. Is it roughly the same size as the stock PS box? Also I noticed that the picture is the same at the Jeffs Bronco Graveyard Pic, is this one used? Doesn't matter much, just wondering.

Also you mentioned it would be a good upgrade, I assume it's beefier than stock. I just put 33's on which I think was enough to break the camel's back. This should stand up?

Thanks in advance.

Graham
 
Status
Not open for further replies.
Top