Randy's Ring & Pinion
Community
 Message Forum
 Photo Gallery
 Event Calendar
 Book Reviews
 Bronco Wallpaper
 Bronco FAQ
 Link Back to CB!
 600+ Bronco Links!
 
Search All Bronco Links
Buy / Sell
 Classifieds / Want Ads
 Vendor Forum
Bronco Tech
Recent Tech Articles
  Holley Carb Tips
 Aussie Locker
 C6 203 205 Doubler
 4 Link
 Clutch Replacement
 Early Turn Signals
 C4 Improvements
 Threaded Dipstick
 NV3550 5 spd
    More Tech...

Welcome to the ClassicBroncos.com Forums.

You are currently viewing our boards as a GUEST which limits your access to viewing only. To take advantage of all the forum features please take a moment to register. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact the admin. If you've lost your password click here.

Go Back   ClassicBroncos.com Forums > 66-77 Ford Bronco > Bronco FAQ > Interior FAQ

Reply
 
FAQ Tools
Popping or "Oil Canning" of the Hard Top Popping or "Oil Canning" of the Hard Top
Causes and solutions to hard top popping
MarsChariot
07/17/06
Popping hardtop (oil canning)

The problem:
Sometimes when driving on the highway, particularly on a windy day, or when passing a big truck, the hard top makes a popping sound like sheet metal slapping back and forth or oil canning. The sound is more or less random, but it is pretty loud. The first time you hear it, you imagine that your hard top sheet metal is undergoing some sort of catastrophic failure, or is going to end up wavy and ruffled with ridges at the end of the drive.

Why it occurs:
No one has done the wind tunnel study, but a some people think it results from lifting of the sheet metal on the roof because of the low pressure that occurs by passage of air over the roof at high speed; kind of like an airfoil. On days when there are high wind gusts, or in the turbulence around a large truck, the flow of air over the top may suddenly change, and that allows the top to snap back to relaxed condition, or it may even be lifted more.
Whatever the ultimate cause, when it snaps back, it contacts support cross members or the oil canning sound of metal flexing is transmitted into the interior.

What to do to fix it:
The flexing of the sheet metal cannot be entirely eliminated, and it is probably not a good idea anyway since there is some need for expansion and contraction just to allow for expansion and contraction with temperature variations. The fix that works for most is to reduce the noise by adding some sort of sound suppression or insulation. Simple layers of sound deadening material (such as Dynamat) can reduce the ringing of the metal as it flexes. For those with cardboard headliners, either the sound deadening material or simple foam or interior type insulation glued to the underside of the sheet metal roof can help reduce the sound. Insulation is probably a good idea in sunny climates, since it can reduce the inwardly radiated heat from the metal roof on especially hot days; and it really helps in cold climates where the loss of heat through the roof can be high on clear nights when upward radiation is high.  

Last edited by admin; 08/01/06 at 03:14 PM.. Reason: added byline
  #1  
kntr on 11/25/06, 09:32 PM
Tennis ball between the rollbar and top helps too.
Reply With Quote
  #2  
DAKOTA7720 on 05/12/10, 03:35 PM
Apply acoustic caulking where the sheet metal top meets the cross bracing.
Reply With Quote
  #3  
tennessee toy on 05/12/10, 08:53 PM
it is a annoying sound.
Thanks for the ideas
Reply With Quote
  #4  
white64 on 11/22/10, 07:52 AM
I've been thinking about how to keep my half cab from oil canning... especially when it comes time to block sand it (it's like sanding a moving target!)

Was thinking... that if I made 5 or 6 ribs out of 1/2 thick x 1 inch wide styrofoam or notched plywood, glue those to the roof inside, spaced 6 inches apart, then cover the inside of the top with a few layers of fiberglass covering the "ribs", which then become fiberglass impregnated stiffeners....

I suppose one could always sand the fiberglass and paint it, or cover it with a headliner...

Anyone tried it? Foresee-able drawbacks? Dumb friggin idea?
Reply With Quote
  #5  
redpony on 10/11/11, 03:49 PM
Hi, Try putting one or more headliner bowes in. This is in addition to the one that is there already on the wagons.
Reply With Quote
Reply

  ClassicBroncos.com Forums > 66-77 Ford Bronco > Bronco FAQ > Interior FAQ

FAQ Tools

Forum Jump


All times are GMT -6. The time now is 05:47 PM.


Bulletin Board Software by: vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.


This site created, owned and maintained by Jon Hanna
Copyright 1996-2018 All rights reserved. Privacy Statement
ClassicBroncos.com is not affiliated with Ford Motor Company

Page generated in 0.42274 seconds with 65 queries