Ruffstuff 9" Third Members!

Gravel Maker · 08/14/14, 03:47 PM

We build these the way I would build them for myself. All have 1350 Pinion Yokes, Solid Spacer, Big Bearings, Daytona Pinion Support, Timken USA Bearings, and a Strange Nodular Iron case that has all the extra strength built into it.

All you need to decide is the type of locker you want (ARB, Detroit, or Spool), your gearing choice, and shaft diameter. The only ARB's we offer are the new designed 9". We do not offer a "True Trac" or "Open" kind of option. These are made only for 31 or 35 spline shafts. We offer the best at a great price.

You can always stop by and pick them up if you are in the area but we only ship them in a bombproof carrier designed specifically for shipping Ford 9" 3rd's. This is at no extra charge to you and a whole lot easier than an insurance claim

Check out the website for prices and you can order them online or call in your order. I will not be giving quotes here, we are simply way too busy for that...

Also, for the first 30 days we are making these an even better deal! 15% off Use the code NEW3RD...

Ford 9" Complete Third Members - RuffStuff Specialties

**lynn w gray** · 08/26/14, 03:06 PM

saw your add, I need 9" with Detroit soft, 456, 31 spline. shipped to Louisiana 71360
1974 ford bronco. thanks lynn 318-229-2264. do you offer axles also ?

Gravel Maker · 10/01/14, 09:31 AM

These were built for the beating!

Gravel Maker · 03/25/16, 11:19 AM

Ready to drop in and party on!

Gravel Maker · 04/12/16, 07:02 PM

Any gear ratio you need, and the 3 most common lockers. Let us know how we can help!

Gravel Maker · 04/25/16, 10:57 AM

And you get to keep the badass Shipping container we send them in.

You're welcome!;-)

Gravel Maker · 07/20/16, 01:51 PM

Packed and ready to your door!

Gravel Maker · 08/31/16, 08:33 PM

All the best stuff!

Gravel Maker · 09/28/16, 10:14 AM

Quick turnaround too! We have these professionally built and sent out the door in only a couple of days!

Gravel Maker · 10/22/16, 07:37 PM

Ready to build it however you want it!

Gravel Maker · 11/11/16, 12:13 PM

Pairs nicely with one of our housings ;-)

Gravel Maker · 12/12/16, 11:18 AM

The 3rd member that will get you there!

Gravel Maker · 02/17/17, 05:03 PM

Just what the good doctor ordered!

Gravel Maker · 04/21/17, 10:11 AM

Did you know Ford originated the "3rd member" concept with their early rear axles. The ring $ pinion were in a doughnut shaped carrier, with the actual axle tubes bolted onto both sides. The tubes were the 1st, and second, while the gears were the "Third member".