Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Atlas transfer case. Built for Ford C-6, ZF, 4r70w, 2000$
4.3 gear ratio, 300m outputs, short heavy duty tailhousing, shifters included, 1350 cv rear, 1350 non cv front, NO speedo connection.
Its about 6 years old and was installed in off road use only buggy, so no highway miles. im guessing it has approx. 25-30 weekend trips on it. Was removed 2 years ago and has been in my shop. Never had water in it, no rock rash. Fresh fluid change prior to removal.
Hello Dave. You say built for a c6. If it fits a c6 then it will also fit a 4r70w? Just thought I would throw this out there.
It may help with the sale.
Yes a 31 spline 4r70W or ZF transmission will also work. Being that the ford autos mainly came as a 31 spline and a 6 bolt round tail housing, it creates swapping transfer cases simple and easy.