• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on. - Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SOLD 1977 Ranger BUILDER, Vista Orange, all the goodies plus EFI

Status
Not open for further replies.

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
This is from Louisiana and must have been kept out of the bayou! She's really solid, but needs to be stripped and painted. It had some spray in bedliner that has mostly been removed. The worst rust is the bottom of the windshield frame and I'm sure behind the diamond plate in lower tailgate. The right rear quarter has surface rust, seam is okay. The rockers, posts, strikers, rear bed, etc are great. Front floors replaced.

It has a 5.0 liter EFI motor, with harness, all sensors, O2 sensors, dual exhaust with cats, C4 automatic, power steering, power disc brakes, factory sway bar still intact, rear end has locker. New battery and master cylinder. Has electric fuel pump and 23 gallon main tank. Runs strong.

The tires are like new and are 30x9.50x15. Dash is hacked but most all gauges work. I'll throw in a stock dash that isn't as chopped up. The frame is very clean. She desperately needs to be stripped and painted. It also has a poorly installed body lift that I'd remove if I was keeping her.

Check it out and PM me if you have questions. Not much out there in this price range. This is a great builder. Also, the top rain gutter on left and right rear is rusty. Seats need recovering, rear glass is out on lift gate. That's all I got! Trying to give all the good and bad. Thanks $12,500.00
 

Attachments

  • IMG_3364.jpg
    IMG_3364.jpg
    131.3 KB · Views: 441
  • IMG_3360.jpg
    IMG_3360.jpg
    135 KB · Views: 358
  • IMG_3375.jpg
    IMG_3375.jpg
    116.6 KB · Views: 357
  • IMG_3381.jpg
    IMG_3381.jpg
    116.8 KB · Views: 385
  • IMG_3389.jpg
    IMG_3389.jpg
    135.6 KB · Views: 534
  • IMG_3371.jpg
    IMG_3371.jpg
    135.9 KB · Views: 363
  • IMG_3368.jpg
    IMG_3368.jpg
    149 KB · Views: 375
  • IMG_3365.jpg
    IMG_3365.jpg
    169.9 KB · Views: 536
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
More pictures
 

Attachments

  • IMG_3390.jpg
    IMG_3390.jpg
    140.4 KB · Views: 255
  • IMG_3384.jpg
    IMG_3384.jpg
    148.6 KB · Views: 187
  • IMG_3382.jpg
    IMG_3382.jpg
    126.3 KB · Views: 214
  • IMG_3383.jpg
    IMG_3383.jpg
    144 KB · Views: 202
  • IMG_3405.jpg
    IMG_3405.jpg
    64.1 KB · Views: 180
  • IMG_3404.jpg
    IMG_3404.jpg
    52.5 KB · Views: 185
  • IMG_3400.jpg
    IMG_3400.jpg
    86.9 KB · Views: 207
  • IMG_3361.jpg
    IMG_3361.jpg
    86.6 KB · Views: 185

JaxLax

Bronco Guru
Joined
Apr 22, 2002
Messages
3,309
Loc.
Jacksonville, FL
Has anyone had a bedliner removed?
Will it come off with a general media blast (if the body was off) or does it have to be scraped/heated off?

This is a very intriguing one for me Baja. The already running EFI is huge. Plus if I did have to take the body off and blast, I'd be going back to uncut fenders and not having to feel guilty about painting/etc.
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Matt, I read and replied to your PM. I'm happy to tell you more about this one. 95% of the bed liner has been removed already. In this case it peels off pretty easy with a scraper.
 

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,664
That's that crappy roll on liner, prolly fly off in 30 minutes with a wire brush in a grinder.
 

T-Bird

Sr. Member
Joined
Apr 12, 2015
Messages
938
Loc.
East TN
Good luck with the sale Chris, this one will go fast. As the auctioneer says
If you think long...you think wrong!
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Thanks, I've got a couple of people interested and JaxLax. Good builder.
 
Status
Not open for further replies.
Top