• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

ProRock 60 Front

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
So I start shortening my 78 60 front housing I picked up and noticed it was bent bad-WTF!. In the scrap pile it went..... Well my budget dana 60 turned into me calling Steve at Dynatrac to build me an empty housing and I sent him the KP Denbear Cs to press on. Its 67 wms with moser max inners and yukon 35spline outers (good deal) thanks to JBG. Used Ballistic highsteer arms and made the tierod with 1 1/2. Blackbird brake brackets and Rockcrusher ford hubs 5x5 1/2 (another great deal from Grant) I reused the ford knuckle and spindles. The arb and 5.38 (took for ever!) are in and it is now in the truck being set up. Here are some pics on the bench- more install pics to come and a 5x5 1/2 shaved 14bolt is in the works.
 

Attachments

  • IMG00035-20100619-0810.jpg
    IMG00035-20100619-0810.jpg
    90.1 KB · Views: 84
  • IMG00036-20100619-0811.jpg
    IMG00036-20100619-0811.jpg
    91.8 KB · Views: 79
  • IMG00037-20100619-0811.jpg
    IMG00037-20100619-0811.jpg
    85.8 KB · Views: 117
  • IMG00047-20100521-1225.jpg
    IMG00047-20100521-1225.jpg
    90 KB · Views: 95
OP
OP
gravy

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
thanks- here is a pic of the new 17x9.5 allied locks and the 37 crawlers- its gona be a couple inches higher in the front
 

Attachments

  • IMG00048-20100521-1228.jpg
    IMG00048-20100521-1228.jpg
    154.1 KB · Views: 107
OP
OP
gravy

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
Here are a few more. Working on getting 13in rotors set up still and finising odds and ends. Thats my little girl putting in some wrench time.
 

Attachments

  • IMG00017-20100612-1205.jpg
    IMG00017-20100612-1205.jpg
    144.6 KB · Views: 88
  • IMG00004-20100629-1614.jpg
    IMG00004-20100629-1614.jpg
    115.5 KB · Views: 75
  • IMG00003-20100629-1613.jpg
    IMG00003-20100629-1613.jpg
    106.8 KB · Views: 81
  • IMG00002-20100629-1613.jpg
    IMG00002-20100629-1613.jpg
    119.1 KB · Views: 78
OP
OP
gravy

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
Finished up a few more things today, track bar bracket and bar are done just need to make the cross brace and the steering is almost done- just need to finish the draglink. A few more odds and ends and she is done. waiting on my new caliper brackets for the 13 inch rotors and premium warn hubs are on nation back order and not coming in for 2 weeks:mad:
 

Attachments

  • IMG00005-20100630-1029.jpg
    IMG00005-20100630-1029.jpg
    93.8 KB · Views: 62
  • IMG00008-20100630-1425.jpg
    IMG00008-20100630-1425.jpg
    113.4 KB · Views: 65
  • IMG00009-20100630-1455.jpg
    IMG00009-20100630-1455.jpg
    110.5 KB · Views: 66
  • IMG00010-20100630-1605.jpg
    IMG00010-20100630-1605.jpg
    128.9 KB · Views: 87
Top