Glove box door hinge mod

Passauf · Aug 17, 2014

Hello,

Years ago I ran across a thread the showed how to cut and modify your glove box door hinges to clear a roll cage.
Does anybody still have a copy of that write up ?
Please forward here or send directly to my e-mail. Thx

Tony
858tonyb@gmail.com

needabronco · Aug 17, 2014

Look at the as classic bronco club article page I think it's there.

BRONCROB · Aug 17, 2014

Here's a link.
http://www.broncohio.com/tech/gloveboxdoor.html

Passauf · Aug 17, 2014

That's the one .. Thanks

garberz · Aug 17, 2014

Check and make sure that your glove box will clear the cage before you cut your hinges. That mod works, but it will only gain you about an 1 1/2".

Mark

BigToe · Aug 17, 2014

The hinge mod didn't give me enough clearance so I found this idea from a brother on here. Worked great for me.

jmangi62 · Aug 17, 2014

I was never a fan of the modified hinges,so I relocated the glove box over & eliminated the speaker grill,it came out great,and I couldn't be happier,it's probably a little more work but totally worth it in my opinion,good luck,

Glove box door hinge mod

Passauf

Sr. Member

needabronco

Bronco Guru

BRONCROB

Bronco Guru

Passauf

Sr. Member

garberz

Bronco Influencer

BigToe

Sr. Member

Attachments

jmangi62

Bronco Guru

Similar threads