Wanted - Passenger door window frame molding/chrome.

**JohnJohn** · 03/08/07, 06:52 AM

Passenger door frame molding/chrome. I am in the process of a frame off restoration on a 77 Ranger Bronco and am looking for the Passenger door frame molding/chrome. It is the aluminum metal that wraps around the window frame of the door.
Just email me or send a PM if anyone has a set.
Thanks,
John

Brian B · 03/09/07, 04:47 PM

I have the top and front piece. The rear piece is messed up. They were on a Bronco that had been cam'd so they have paint on them. It cleans off easily and has protected them from the weather. They will clean up nicely with lacquer thinner.

**PAPITT** · 03/10/07, 10:17 PM

I'm going to ask here (ROB) how were you supposed to get this trim off with out messing it up ..I have a set I think ...but when I took it off my doors and top it's all warped and has little marks where the screwdriver I used made little bends or marks and as it came off it all warped ....Sure hated I ruined it but when I took it off I didn't want it and I was new here an didn't know what some of this stuff would bring ....

thegreatjustino · 03/11/07, 03:40 PM

Quote:

Originally Posted by PAPITT

I'm going to ask here (ROB) how were you supposed to get this trim off with out messing it up ..I have a set I think ...but when I took it off my doors and top it's all warped and has little marks where the screwdriver I used made little bends or marks and as it came off it all warped

I used a large putty knife. I can see how the screwdriver would have totally ruined it. Some of the pieces still came off a little warped, but should straighten back out upon installation.

iwlbcnu · 03/12/07, 07:21 AM

I have a whole door with it off a 77 here in Orange.

**PAPITT** · 03/12/07, 09:44 PM

I used a putty knife for a little while it just made the bend further apart...
I did tell myself that it would staighten out upon reinstallition ...