Tech article by jerry74explorer
To re-attach the main door glass to the channel which lifts the glass you will need a piece of rubber hose cut to the length of the channel (I used 3/8” fuel line), a pair of scissors, an extra pair of hands and some liquid soap. Take the channel and remove the [...]

Tech article by Karl Wise (kwspony)
Here is a simple way to install locking wing window latches on your early Bronco. I got tired of hearing the wind whistle through the gap in the seals because the latches weren’t tight enough.

Tech article by Keola Ford (Bronc)
Parts Needed:

Stock Hinges
New Hing Pins (only if needed)

Special Tools Required:

Cut-off Wheel(s)
Grinder

I did this modification so that I could make my bronco even more convertible. The mechanics of this lift-off hinge is simple. If you have done, or are familiar with the glove-box sliding door mod, it’s basically the same thing. [...]