• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Stock 3 speed tranny

Stag72

New Member
Joined
Jan 28, 2008
Messages
11
Loc.
Ishpeming, MI
My shift rods are leaking, I ordered the gasket sets and o-rings, but am not sure of the proper steps for taking that tranny apart. Does anyone know a link to a good schematic of it?
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,341
Welcome
You may want to invest in a good repair manual like a Ford truck manual it will have all the info you need. You may need more than just seals and gaskets as I believe your going to have to remove all the internals to replace the shifter orings. Might be a ghood idea to get a whole rebuild kit.
Here's a link to a 4 speed teardown a 3 speed is almost identical to this. http://www.google.com/imgres?imgurl...-JSWBQ&sa=X&oi=image_result&resnum=1&ct=image
 
Top