• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

No brake lights but hazzard lights work

tampabronco

Sr. Member
Joined
Jan 10, 2011
Messages
458
Any suggestions on where to start? Rear lights work and lights blink with hazzard switch but no brake lights when pedal is pushed. I did a quick check for loose grounds but no luck.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,316
Check brake light switch. 12V in and 12V out when pedal is pressed. If that's good the turn signal switch is bad.
 
OP
OP
tampabronco

tampabronco

Sr. Member
Joined
Jan 10, 2011
Messages
458
Should have mentioned I have new turn signal switch

driving me nuts trying to find
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
34,833
No more complaining allowed until you check your brake pedal switch.

You have a new turn signal switch you say, does the installation of this switch happen to be the same time the brake lights quit working?
 
Top