- Joined
- Jun 5, 2007
- Messages
- 1,079
Well I was all pumped to start working on this but I think time got it. I came out to check on the bronco and it might be to far gone. I was hoping to just patch it up a little and add all the parts, trans, motor, ect while I drive it awhile. Kinda of “mock it up” before I tear it all down to do the body panels. I’m not sure why the one side is sagging. Body Chanel’s look straight. But it does seem like the floor seam to the wheel well is turning to dust. It is sitting at an odd angle on the ground. But I doubt this is the body flexing. Tell me what ya think. Or if anyone has a bandaid for this until I’m ready to tear it all down or if it’s not really savable.
Attachments
-
D9637220-7D65-4577-BC44-5B35B4597C27.jpeg171.2 KB · Views: 154
-
144FE77B-90FA-45D5-89E5-F3F70DD0A4CC.jpeg139.6 KB · Views: 154
-
E6AD98C6-52BA-43FB-BAC3-CF521B4C5836.jpeg91.7 KB · Views: 145
-
44F7FCF6-4E45-401E-BAE7-531EEF029CC6.jpeg202.3 KB · Views: 145
-
20DD61B1-FF45-44EB-9CCB-6B9F99C8CA69.jpeg222.4 KB · Views: 148
-
BF65089E-60DB-4C02-AA0E-D46CCECD515A.jpeg161.3 KB · Views: 143
-
EEBD6EF3-8406-4B5A-B819-25BDFB0C04DD.jpeg196.6 KB · Views: 153
-
8D34D55F-50CB-4547-B6C9-40CDD17CED09.jpeg159.5 KB · Views: 149
-
7B7A151B-F72B-4F19-A3C0-0EC0AB05CBB7.jpeg162.2 KB · Views: 149
-
45FE8B5F-56F0-4399-AFF0-B0369B6519F0.jpeg220.4 KB · Views: 155