• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
brewchief

Latest activity Postings About

    • brewchief
      I use ratchet straps with built in axle straps, loading and strapping my bronco takes less then 10 minutes and I can do in about 5 if i...
    • brewchief
      brewchief replied to the thread Raduis arm cap bolts.
      I ended up fixing it last weekend, turns out the other bolt was loose, had about a 3/16 gap at the bottom. I could turn the bolt that...
    • brewchief
      brewchief replied to the thread Weather pack help.
      There are a wide variety of sealed automotive type connectors so don't limit yourself to weatherpack stuff. Spend a bit of time and...
    • brewchief
      I've had several times in the 27 years or so that I've owned my bronco that's its sat for a couple years without being started. I simply...
    • brewchief
      brewchief replied to the thread Raduis arm cap bolts.
      No wristed arm, stock arms, deaver springs and poly bushings. I don't normally see a ton of articulation at the dunes, plenty of...
    • brewchief
      I found a raduis arm cap bolt missing it's head after a trip to the sand dunes, removing it isn't a major deal but was wondering what to...
    • brewchief
      brewchief replied to the thread Low Fuel Pressure EFI.
      When you start looking at buying a new intake, throttle body, mass air, bigger injectors and getting it tuned systems like edlolbrooks...
    • brewchief
      brewchief replied to the thread Low Fuel Pressure EFI.
      I think a 19lb injector is maxed out at less then 300hp. Are you using a truck lower intake and one of those adapter plates to fit a...
    • brewchief
      brewchief replied to the thread Odd Grille paint.
      I wonder if it would be better to start with a non chrome grill and sell that to someone who wants it, I'm sure there is probably...
    • brewchief
      How much uptravel can I get with a full width high pinion dana 44? Right now with the stock low pinion stock width axle the bump stops...
    • brewchief
      brewchief replied to the thread Torque converter advice needed.
      The average trans shop won't be able to change stall speed, a custom convertor builder certainly can. I had one built for my bronco vs...
    • brewchief
      brewchief replied to the thread 75 power steering gearbox.
      Yes they can be converted to a 4 or 3 turn box, some of the rebuilders offer it as an option. Sent from my SM-G965U using Tapatalk
    • brewchief
      brewchief replied to the thread 15 Wheels on GM front disc.
      I've got slots that I presume are from the 70s( they had tires from the 70s) and they clear my gm front brakes, they don't clear a stick...
    • brewchief
      I don't know why it would be locked in 4wd on pavement, without a center diff it's going to bind on every slight corner. If using 4wd to...
    • brewchief
      brewchief replied to the thread 69 bronco.
      Np 435 will drive basically the same as the 3 speed but will have the super low first gear. If your planning much highway driving leave...
  • Loading…
  • Loading…
Top