• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Recent content by sequoia73

  1. sequoia73

    No Power to Coil in Run Position

    I'll try that tonight. The painless kit follows the same colors as the original about 99% of the time but I know what wire you're talking about. I think there's just a bad connection somewhere. I just have to find it now, after everything is loomed and nice and tight.
  2. sequoia73

    No Power to Coil in Run Position

    Just replaced the switch and solenoid for grins and still no power at the coil. Fuses are good. So frustrating
  3. sequoia73

    No Power to Coil in Run Position

    Looks like that's the next step. New switch and solenoid didn't fix it.
  4. sequoia73

    No Power to Coil in Run Position

    I'll try to keep this short. 73, 302, Carb, new painless kit, coil, ignition module, voltage regulator, solenoid basically everything but the electronic ignition in the distributor is new on the electrical side, including the switches I got in the painless kit from Wild Horses. Truck had been...
Top