Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
S

steelworker77

Contributor
New Member
Joined
Last seen
Messages
84

Latest activity Postings Attachments Images About

    • S
      steelworker77 replied to the thread OER New PS Box.
      I have the lares box and everything was a direct swap. I have had it on for maybe 7500 miles and so far no issues.
    • S
      steelworker77 replied to the thread carb/timing help.
      I am actually up to about 17" of vacuum now the way it is currently setup. I had tried 18 and 20* of initial and it seems to respond...
    • S
      steelworker77 replied to the thread carb/timing help.
      I do have an air gap intake, correct. Forged pistons. Cam specs are 2000-6000 rpms and its only slightly bigger than the cam they use...
    • S
      steelworker77 replied to the thread carb/timing help.
      Got to spend some time on it yesterday some. Got m slow return to idle fixed (linkage rubbing on firewall). Played with timing...
    • S
      steelworker77 replied to the thread carb/timing help.
      I have had a little bit of a slow return to idle ever since installing the motor. I really just chalked it up to the throttle linkage...
    • S
      steelworker77 replied to the thread carb/timing help.
      14 was the absolute highest I was able to get out of it. Im just rich on the mixture screws to band aid the hesitation some. Came...
    • S
      steelworker77 replied to the thread carb/timing help.
      Idle vacuum is 13. I don't have a reading while driving. May try and rig up a longer hose this weekend. I think im going to invest...
    • S
      steelworker77 replied to the thread carb/timing help.
      Checked for vacuum leaks multiple times and havent found anything. Running hydroboost so no booster. I do have a pcv valve and I was...
    • S
      steelworker77 replied to the thread carb/timing help.
      Appreciate the help. I did go ahead and order a 35 pump nozzle. Currently has a 31. Also ordered a cam kit. Primaries are 70...
    • S
      steelworker77 replied to the thread carb/timing help.
      waiting on a call back. Seems the 4 corner adjustment carbs are more for track use with the added adjustability after talking to a few...
    • S
      steelworker77 replied to the thread carb/timing help.
      It actually likes even more timing but the 18* bushing is the biggest they sent so im not comfortable going over 36 total so 18 initial...
    • S
      steelworker77 replied to the thread carb/timing help.
      I have played with it some. I havent tried different cams or squirters. I was actually thinking of going to a 35 from the 31 to see...
    • S
      steelworker77 replied to the thread carb/timing help.
      Just pulled #1 plug after drive to work this morning. Total timing maybe a little to much reading the ground strap?
      • 1000000657.jpg
      • 1000000658.jpg
      • 1000000659.jpg
    • S
      steelworker77 posted the thread carb/timing help in Bronco Tech.
      Still playing with my carb on my BP 347. Came with a Holley 670 Brawler 4 corner carb. No experience with the 4 corner setup at all...
    • S
      steelworker77 replied to the thread First snow of 2025.
      Our 71.
      • 1000000646.jpg
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top