Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Thank you for that
Thank you for that - I was going crazy trying to find it. As you can tell I am not well versed yet.
The issue I am having is it starts to sputter like it is running on 4 cylinders instead of 8 ( 302 ) then it kicks back for a short time to running normal. I changed the...
When I test fit the lower right quarter panel the lip that should be welded to the tail light post has a very large gap.
It seem like I won't be able to weld them together because they are not touching.
Any thoughts would be greatly appreciated.
Thank you
Robert
Hi,
I am trying to install lower quarter and wanted to know am I drilling any holes inside the tail light opening to weld the lower quarter ?
Thank you
Robert
Hi,
I am about to put on a cut lower quarter panel on with panel bond across the top.
How do I to squeeze the lower quarter panel to the upper after applying panel Bond ?
Much appreciate any help.
Thank you
Robert
Hi
I just tried to test fit my rear lower quarter on the right hand side and it looks like the panel at the bottom does not matchup. I may be able to push it so it matches up with the tail light and door pillar but it looks like I would bow or warp the whole panel.
Is this something everyone...
Thanks for the input, much appreciated. I replaced the front fender and have the door off so I do not know what the gap is yet. Will keep you posted after I get it on and will take a picture of the door gap.
Thanks
Robert
Thanks for the input. Would I loosen the bolts and tap the fender and try and move it up that way or should I take the whole thing off ?
Much appreciated !
Robert