• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SOLD WTB: 71-77 EB

Status
Not open for further replies.

jeffncs

Contributor
Sr. Member
Joined
May 4, 2004
Messages
1,108
Loc.
Raleigh, NC
City: Raleigh, NC
Casually looking for my next project and hoping to replace that which I sold as we started a family…. 66-77 bronco. Prefer 71-77, but wont rule any out. Leads on projects also appreciated and rewarded ($$ or ammo) for a referral, purchased vehicle. I’m not afraid of rust or mechanical issues.

Located in Raleigh, NC, but I have a trailer and am equipped to move rusty, immobile vehicles for total restoration.
 

BeauBrian

Newbie
Joined
Jun 20, 2021
Messages
2
Casually looking for my next project and hoping to replace that which I sold as we started a family…. 66-77 bronco. Prefer 71-77, but wont rule any out. Leads on projects also appreciated and rewarded ($$ or ammo) for a referral, purchased vehicle. I’m not afraid of rust or mechanical issues.

Located in Raleigh, NC, but I have a trailer and am equipped to move rusty, immobile vehicles for total restoration.
I'm thinking about selling my 1973 Bronco project if I find the right buyer and price. My wife and I just had twins and I really don't have time to for it. It has a 302 V8 automatic that does run off trigger switch, Bronco doesn't drive because I'm rebuilding the steering column and then brakes next. body needs a new tub or 80% rebuild. needs quarters, floors, inner right finder well, rockers and A/B pillers. Email if interested Beau Brian Chesapeake VA Beaubrian9@gmail.com
 
OP
OP
jeffncs

jeffncs

Contributor
Sr. Member
Joined
May 4, 2004
Messages
1,108
Loc.
Raleigh, NC
I'm thinking about selling my 1973 Bronco project if I find the right buyer and price. My wife and I just had twins and I really don't have time to for it. It has a 302 V8 automatic that does run off trigger switch, Bronco doesn't drive because I'm rebuilding the steering column and then brakes next. body needs a new tub or 80% rebuild. needs quarters, floors, inner right finder well, rockers and A/B pillers. Email if interested Beau Brian Chesapeake VA Beaubrian9@gmail.com

email sent…
 
OP
OP
jeffncs

jeffncs

Contributor
Sr. Member
Joined
May 4, 2004
Messages
1,108
Loc.
Raleigh, NC
Bump - cash in hand. Looking for that diamond in the rough.

Empty trailer ready to haul away your headache.
 

Fordbroncodriver

New Member
Joined
Jun 9, 2022
Messages
2
Bump - cash in hand. Looking for that diamond in the rough.

Empty trailer ready to haul away your headache.
I have a blue 71 in Kannapolis I will sell although it doesn't cause headaches...It is however a diamond in the rough..call if interested..704-565-1365
 

BigRob

New Member
Joined
Dec 6, 2011
Messages
16
Loc.
Spokane
I have a 72 sport. 302 with 351w heads and 351w cam, nv3550 5 speed, dana 44 stock gears, big bearing 9 inch with 4.56 gears. front disc conversion not completed... its definitely a project. pnw rust. it ran last week but now the starter just clicks... front floors were cut out.. as is no warranty.. Spokane Wa. ... $9500 titled and current registration in washington

i have pics on my phone.. text me during reasonable business hours and i will send them to you ... 5 zero 9, six seven 1, six four 64
 
Last edited:

saber

Contributor
Newbie
Joined
Jan 18, 2009
Messages
36
My buddy and I put together project Broncos for guys looking for just that, we do this as a hobby, this is one of our latest projects that should be ready to ship in about a month.

75 broncos uncut with 75 title
Has 67 uncut body on a 75 frame with all new running gear, it will be a rolling / steering chassis with body on it, with good doors, rust free top, and with all parts created inside the Bronco ready for transport.
The body will need some rust repair like new floor pans (comes with bronco) and also might need some of the bed repaired or replaced as well, rockers are solid but dented on one side.


Professionally newly rebuilt 302 on 1978 Mexico casting block
Professionally newly rebuilt dana 44/ drum breaks
Professionally newly rebuilt C-4 transmission
Professionally newly rebuilt dana 20 (T shift)
New 350 gears in small baring 9” rear end 28 spline axles drum breaks
2 New front fenders from Tom’s
Vary good grill
Tailgate 1967
Good hood
Windshield frame with electric wiper / new glass
New 1” body lift from toms
New body mounts from toms
New Tom’s coil Springs 2-1/2 soft ride
Automatic steering column / steering wheel.
New proportioning valve with bracket
New tinted windshield glass from Tom’s
Stock 66,67 bench seat / bulkhead
Great condition wheels and tires
Power steering box
Power steering pump
Distributor
Alternator used
Starter used
New water pump
New spark plugs
New 4 Barrel intake Manifold Edelbrock aluminum
New 4 Barrel carburetor Holly
Wild horses Winters sidewinder shifter new
Rust free Top / good window glass and lift gate.
Rust free hood
Good rust-free doors/ glass
New floor pans
Break booster
Shocks
Painted frame
New duff’s single exhaust with turbo muffler





If your interested in this bronco with everything listed above (including all parts to put together )
25,500.00
Matt
mtsansen@hotmail.com or
425-466-0885
 

Attachments

  • 20220515_073120.jpg
    20220515_073120.jpg
    139.8 KB · Views: 100
  • 20220609_151824.jpg
    20220609_151824.jpg
    142.2 KB · Views: 86
  • 20220515_073355.jpg
    20220515_073355.jpg
    137.6 KB · Views: 71
  • 20220515_073157.jpg
    20220515_073157.jpg
    152.8 KB · Views: 72
  • 20220515_073141.jpg
    20220515_073141.jpg
    165.2 KB · Views: 60
  • 20220609_114819.jpg
    20220609_114819.jpg
    129.3 KB · Views: 61
  • 20220515_073108.jpg
    20220515_073108.jpg
    155.7 KB · Views: 75
  • 20220609_114822.jpg
    20220609_114822.jpg
    105.9 KB · Views: 54
  • 20220515_073415.jpg
    20220515_073415.jpg
    135.2 KB · Views: 65
  • 20220515_073228.jpg
    20220515_073228.jpg
    162.9 KB · Views: 84
OP
OP
jeffncs

jeffncs

Contributor
Sr. Member
Joined
May 4, 2004
Messages
1,108
Loc.
Raleigh, NC
Thanks guys! I’m actually heading out tomorrow with my trailer to pick up a project. I’ll post pics of my incoming mess, bu5 it will be a fun build!
 
Status
Not open for further replies.
Top