• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. G

    SOLD 73 hard top

    Original hardtop off a 73’. Looks to be in pretty decent condition. Previous owner installed sunroof. Liftgate is fully functional with all original glass. Local pick up only….
  2. G

    CA WTB stock radiator bracket

    I need a set of stock radiator brackets. I’m looking for the top two that hook over the radiator or the full set with the bottom also. Thanks mason
  3. G

    4.0 Radiator swap

    I’m looking at running the 94’ explorer radiator and have some questions on the install. Im running a 98’ explorer motor with the broncoguy a/c compressor. 2.5“ lift with 1” body lift, 4r70w trans with aux cooler. Broncos a family cruiser that will see light off-road use mostly street. For...
  4. G

    CA speedo outer bezel

    I’m looking for the outer bezel for a speedo. Let me know if you have one thanks
  5. G

    Hydroboost brake adapter

    Does anybody know if any of our vendors makes the 1/2” adapter that goes between the booster and the master cylinder? I’m following the emotomans write up with the f250 hydroboost and diplomat master cylinder. Wanted to see if anybody makes it before i have a fabricator build me one...
  6. G

    CA Rear Liftgate

    I’m looking for a stock rear liftgate for my hardtop. Year (69-77) If anybody knows of one let me know. Thanks mason
  7. G

    CA Need stock gas pedal assembly

    I’m looking for a used stock bronco gas pedal assembly. thanks mason
  8. G

    Nylon fuel line efi.

    Guys that are running nylon fuel lines for an efi application. How are you fastening the hose to the frame? I’m interested in running Nylon for my fuel lines but have read not to use clamps on the hose itself. I plan to run fuel line on top of frame. I’m at the point with my build where I need...
  9. G

    76’ dana 44 bracket

    Can someone tell me what this bracket is for on my 76’ dana 44 front axle?
  10. G

    CA Edelbrock performer rpm

    Looking for 86-95 edelbrock performer intake for my 306 engine build. Any leads would be appreciated. Thanks
  11. G

    Dana 20

    Where can I buy interlock rods for Dana 20. I have a j shift Dana 20 and must have misplaced the (pill). And can’t find a vendor that sells them. I am converting to twin stick. Do I even need them??
  12. G

    CA WTB 75’ earlier frame with vin

    Looking to buy a 75’ and earlier frame and glove box lid with vin/title. Matching would be awesome. Starting a new project. Any leads would be great thanks.
  13. G

    Looking for quality Transmission shop

    I was wondering if any of you guys living in northern ca. Around the bay and surrounding area know a reputable and honest transmission shop to get my 4r70w rebuilt and AA adapter installed on it? I live in Vacaville. Thanks
  14. G

    Disc brakes on ford 9”

    I’m having my axles rebuilt and was wondering what the easiest way to go about adding disc brakes to the rear end of my 76’. I’d like to do the explorer disc brake conversion. My question is what axle shaft should i put back in the rear end to make for an easy install with explorer setup. The...
  15. G

    Ruff Stuff rear brakes

    I was wondering if anyone has used the Ruff stuff rear disc brake setup with the weld on bracket for ford 9”. If so, how hard was the install? Will i have to move the rear shock over like some kits do? And for a newbie is there some sort of template to position on the axle to know where to tack...
  16. G

    4R70W rebuild

    Hey guys, i’m getting ready to take my 4r70w trans in to get rebuild. My question is: Is there anything outside of a routine rebuild i should be telling the transmission tech to do while he’s got it opened up. Both motor and transmission are out of a 98’ ford explorer 4wd with 150k on it. I plan...
  17. G

    Bronco Builders

    Hey guys I’m new to the forum and just wanted to get some input and suggestions on how I should go about restoring my 1976 bronco. I’m located in northern ca. and trying to figure out what resources i have somewhat close to me as far as a reliable trust worthy shop or shops for all around bronco...
Top