Search results

thanks everyone for the help. these pictures are better than the ones that came with my harness. I've went and downloaded a new instruction book

thanks. my manual is not in the best condition its been sitting in the garage for two years and is faded. but thanks again for all the help

ok I'm trying to get my daughters 74 done before Super Cell West. So two questions for now. the red battery wire to the amp gauge should I cut it to go through the loop or cut the loop, second question is for the ignition wiring has a black wire with a eye connector on it do i need to go to a...

Thanks mine doesn't have any holes predrilled in the crossmember so looks like i will be drilling them

Have a question. I have an Aero fuel tank, the question is how did you mount the front brackets to the cross member. did you cut an access hole in the frame so you could get a bolt in there. the side brackets are easy to access with the bumper is off. Thanks for your input.

EFI guy (Garry) makes the harness plug and play, very easy to follow each wire is labeled as to were it goes, he can reflash the computer, just reach out to him first and talk to him. Very smart at what he does

they welded it up for me. it was also a pretty quick turn around. I like it cause I'm running an 99 explorer with no fuel return line so I can use the stock fuel sending unit/pump

I purchased an Aero 23 gallon tank and had them cut the hole for the stock explorer fuel pump/sending unit

You might want to try looking at the 06 and newer Hyundai elantra steering column it is electric just need to run and pos and a ground. the only problem is at highway speeds it will feel loose but in a parking lot at slow speed it will feel fine because you won't have the computer cutting the...

Thanks just sent an email. 904bronco. I like the way your tank is set up what kind of body lift do you need?

Ok bronco brother's and sister's, have a question for you getting ready to order parts and looking for input. I'm installing an 99 explorer efi in my daughter's 74. Looking for a 23 tank that I can install the explorer pump in since the 99 is a returnless system. Thanks

John, I have a set of 30x9.50 on 15 rims. I will be back home this weekend I can pull them off of the half cab and let you try them

I just did the WH 1 inch body bushings really nice will be using again for my other bronco. Just one word of advice the bushings right behind the seats there are holes in the frame and if you are not carefull the bushing sleeve fits perfectly through the hole. Not fun trying to fish them out...

Thanks for all the info. Just looking at some better fuel mileage for a daily driver.

Looking for some info on has anyone ever put an ax15 behind a 6 cylinder. Talked to Matt at wild horses today and they said a member here had put a nv3550. Just wondering what bell housing and flywheel they used. Thanks for the help

Don't forget that it also has a camper that slides in.

Ok have a question I have a 69 bronco no body lift or suspension lift. The question is could I fit 35 under it. The fenders and quarter are already cut. I can get a killer deal on them. Planning on a lift next summer. Thanks Alex

Every once in a while my bronco wont start, checked spark and no spark, then it starts right up. I thought it was the dura spark so changed boxes, it would be fine then it acts up doing the same thing, switched over to the msd box and then the same thing. when it has no spark I check and it has...

This bronco is in bad shape. If you look closely at the right rear corner there is a three inch gap. The whole left side is all burnt. The gentlemen also has a 66 for sale too. It's sitting next to highway 24 in Falcon, Colorado.

Welcome you will love this area, lots of wheeling and best of all an awesome group of Bronco lovers here. If it is going to be your daily driver I would go with tall and skinny tires, I run 33x 10.50 and they cut through the snow better than fat tires but that is my preference. but again...