Search results

Pictures are color coded please help!

Perfect hooked it up, thank you once again everyone! Could not do this project without you! T minus 6 weeks until my finish goal.

Okay just that little nipple on the top of the rad by the cap. How does that work then? Coolant from the reservoir isn't suppose to go back to the rad somehow?

Does it matter where the coolant reservoir hose goes? I only got one hose on it is this normal? have lots of spots in the manifold I could put it just don't know where

Got it figured out with various fittings from a good parts shop. Thanks everyone

Went to a hose shop and a big truck shop, nothing. Because they don't have the fancy O ring hose end/ fitting for the hydro boost. Where did everyone else go to get these hydro to bronco hoses made?

Looking for a place to run Tach wire and Stereo Deck Is the stub on the back of ignition as showed powered on RUN/START? What about ACC? Brock

Thank you justino

As title says Thanks guys! And gals!

Can someone help me with where everything hooks up? I have read the tech article but want to make sure everything is right. Do I need this fluid cooler (see pic)? I labeled everything in colors so it might make it faster/easier to tell me which goes where. Thanks Brock

I already box lined over the inside and outside of the pan. are those measurements right for the rod hole? 13" from left side towards the gas peddle and 10-3/8" from flat floor bottom up to center of hole

Yes I have a brake pedal darn. Where is the hole for the clutch rod? I might just try make that piece to line up

I have seen that picture and it doesn't really help my situation, it only shows how everything goes together. Looking for the specifics on the clutch pedal piece I am not sure, my pedal looks exactly like that picture from toms, it doesn't show that little flat bar piece off the pedal

It appears my clutch pedal does not have one welded to it. Maybe its not a weld on thing but that's what I have been told. I am going to need to make my own so here it is... -What does it look like? -And rough dimensions if possible? -Does it weld on or go on the little cotter pin stub...

Oh another quick question, how does the clutch return spring mount?

Perfect thank you! It doesn't appear I have anything like that on my clutch pedal, I will probably just get everything else hooked up and like you suggest make my own. Possibly make the adapter for the newer block as well. Thanks again for the clarification

Can someone explain to me, or pictures would be great how this system goes together. I bought the bell crank kit from Tom's and I can't figure out how this goes together. Also, I do not have the parts that are circled in red in one of the pictures. Where am I able to get them? The piece from...

I am having a b*tch of a time trying to mate the transmission to the engine. It just won't go, It's the bushing that comes with the AA kit. Why won't it go in, any other people have trouble tips?

Is it critical that the parking brake be mounted up that high? Before the last comments of explaining that little hole above the wiring hole was the top one, I have drilled new holes elsewhere about halfway down the firewall, my top hole is about where the bottom hole should be, that is just...

Okay so the park brake floor mount goes on that hole to the left with the little hole above it. and the high beam foot switch goes on the bottom big hole there close to the bend?