• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. W

    Hesitation under load

    Thanks for the advise and will become a contributor shortly. Much appreciated.
  2. W

    Hesitation under load

    Thank you, much appreciated Chuck
  3. W

    Hesitation under load

    Thank you for that Thank you for that - I was going crazy trying to find it. As you can tell I am not well versed yet. The issue I am having is it starts to sputter like it is running on 4 cylinders instead of 8 ( 302 ) then it kicks back for a short time to running normal. I changed the...
  4. W

    Hesitation under load

    Hi Cleckner. I have a 71 Bronco and what you described is happening to me. So the ignition control module was the issue ? Thanks Robert
  5. W

    SOLD James Duff Diamond Plate Rocker Guards

    I am going to just keep the rockers and not cover them. Thanks for your time, much appreciated.
  6. W

    When I test fit the lower right quarter panel the lip that should be welded to the tail light housing has a very large gap.

    When I test fit the lower right quarter panel the lip that should be welded to the tail light post has a very large gap. It seem like I won't be able to weld them together because they are not touching. Any thoughts would be greatly appreciated. Thank you Robert
  7. W

    What am I welding through the tail light housing to install Lower quarter ?

    Hi, I am trying to install lower quarter and wanted to know am I drilling any holes inside the tail light opening to weld the lower quarter ? Thank you Robert
  8. W

    What to use to squeeze the lower quarter panel to the upper after applying panel Bond ?

    Did you panel bond the lip running down the door post as well ? Thanks for your help and the picture.
  9. W

    What to use to squeeze the lower quarter panel to the upper after applying panel Bond ?

    Hi, I am about to put on a cut lower quarter panel on with panel bond across the top. How do I to squeeze the lower quarter panel to the upper after applying panel Bond ? Much appreciate any help. Thank you Robert
  10. W

    Lower Rear quarter panel does not match up at the bottom of the tail light pillar or door pillar.

    Thank you, do you mean cut the lip up and weld it ? Thanks, great pictures !
  11. W

    Lower Rear quarter panel does not match up at the bottom of the tail light pillar or door pillar.

    Hi I just tried to test fit my rear lower quarter on the right hand side and it looks like the panel at the bottom does not matchup. I may be able to push it so it matches up with the tail light and door pillar but it looks like I would bow or warp the whole panel. Is this something everyone...
  12. W

    Rocker Panel a bit too long when trying to install, best way to shorten it ?

    Thanks for the input, much appreciated. I replaced the front fender and have the door off so I do not know what the gap is yet. Will keep you posted after I get it on and will take a picture of the door gap. Thanks Robert
  13. W

    Rocker Panel a bit too long when trying to install, best way to shorten it ?

    Thanks, I took the front fender off and it gave me a tiny bit of room. I will need to grind a bit off the rocker but thanks for the idea.
  14. W

    Rocker Panel a bit too long when trying to install, best way to shorten it ?

    Thanks for the input. Would I loosen the bolts and tap the fender and try and move it up that way or should I take the whole thing off ? Much appreciated ! Robert
  15. W

    Rocker Panel a bit too long when trying to install, best way to shorten it ?

    Hi, Pillars are original. The body is not off the frame. I am less than an 1/8 inch off. I could force it in but didn't want to have it bow out or in. If they are to be modified which I think that is the case do I cut/ grind the ends or is there a different way to do it ? Thanks for any help.
  16. W

    Rocker Panel a bit too long when trying to install, best way to shorten it ?

    Hi My Rocker Panel is a bit too long when trying to install, best way to shorten it ? Do I grind , cut, or beat it to make it fit. Thanks Robert
  17. W

    Where the upper and lower quarter panel meet the under upper quarter panel seam is very rusty

    What is the best way /tool /Chemical to get rid of the nasty rust on the upper quarter panel flange before I can attach the lower quarter panel. Thanks Robert
  18. W

    Does anyone know the screw size for the front fender along the door pillar, there are 3 of them ?

    Hi, I stripped the 3 screws for the front fender that attaches to the door pillar. Haven't been able to extract them either but.... Would anyone know what size they are ? Thank you Robert
Top