• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. 69broncoMA

    BMW seat install

    Im late to the show lol. Not E46, they are E90
  2. 69broncoMA

    TN Throwback/Super Celebration parts sale/swap

    Im interested in the tank. Are you going to Super Cel?
  3. 69broncoMA

    Gauge Cluster Help

    sounds like a short to me.
  4. 69broncoMA

    3 Speed Manual Shudder / Wheel hop in Reverse and First

    So I have been experiencing chatter also and Im suspecting my its my trac lok rear end causing the issue. Either that or my transfer case. Im curious if you are or were using a stock Trac loc rear end? I have this loose clunk feeling that seems to start at the same time the as the chatter...
  5. 69broncoMA

    BMW seat install

    Pretty much the same as the 3 series just manual. They will fit well. But if they mount like 3 series seats you will need to drill holes or make adapter plates to mount them. Sent from my SM-G988U using Tapatalk
  6. 69broncoMA

    BMW seat install

    Sweet Sent from my SM-G988U using Tapatalk
  7. 69broncoMA

    BMW seat install

    Yup. It slides the seat forward. I know how to make it work but I don't know what wires do what. I guess I'll have to pull the switch and test for continuity. Hopefully there aren't too many wires. Sent from my SM-G988U using Tapatalk
  8. 69broncoMA

    BMW seat install

    We're you able to get the upper switch to work near the headrest? I was thinking I could wire it up in parallel to the side switch to make it move. I just don't know the wire colors for the side panel switch. Sent from my SM-G988U using Tapatalk
  9. 69broncoMA

    Anyone have a part number for a decent mechanical fuel pump?

    Maybe pcv clogged causing pressure in crank case? Sent from my SM-G988U using Tapatalk
  10. 69broncoMA

    BMW seat install

    I've been searching for a long time. I can't find one so I'll look and see if your wire colors that you posted match mine. I guess the easiest way is to get the factory button if it works... Just want it to cycle properly without proper cycling it will over heat on high. Wish me luck I'll let...
  11. 69broncoMA

    BMW seat install

    My seats are e90 seats so they are controlled by the module under the seat. I wonder if that button will work with mine. Sent from my SM-G988U using Tapatalk
  12. 69broncoMA

    BMW seat install

    Do your seats have three wires on the bottom element? Sent from my SM-G988U using Tapatalk
  13. 69broncoMA

    BMW seat install

    I know I can run heated seats with a relay using parallel and series wiring. My concern is that the bmw seat heaters use a computer controlled setup with thermistor in the bottom cushion vs a thermostat. I was thinking I could find a 12v thermostat normally open with a 40*Celsius cut off so...
  14. 69broncoMA

    BMW seat install

    I'm going to buy the same parts thanks for doing the research. What was your solution for the heated seats? I was going to use a aftermarket heated seat switch and a relay to either power the seat in parallel or series with the two heating elements. Which would be 12v or 6v giving me two temp...
Top