• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. skinner

    good shop needed to do a 6cyl to V8 swap in GA.

    I had most all the parts to do swap, thought I would just stay 6 cyl, Nah, need more go in the hills around here, sold them, now I'm wishing I had not. I'm really not in the mood to take forever to do the swap myself. Looking for a good shop in GA. or real close to take my 66 to and get the...
  2. skinner

    6 cylinder with NP 435

    Question on this swap.. I see "adaptor plate" mentioned, I'm at a loss as to this part, I see that the i6 intermediate housing will still be used for a 6cyl swap, from what I can tell. Is there a small plate that goes between np435 and i6 intermediate housing? I'm wanting to attempt this swap soon.
  3. skinner

    stock faceplate bluetooth upgrade

    You have sold me on this.. I may have missed it, but are you planning to make more to sell? Is this just a one off thing for yourself? Either way, applause to you for this..
  4. skinner

    GA 1966-1967 steering column cover

    let me look in my box.. If still I have one, you can have it, might have gone with my roadster when I sold it..
  5. skinner

    GA stock wheel(s) needed

    Im looking for one or two stock wheels, destroyed one today from loose lug-nuts.... anyone have one near central Ga that want to sell?
  6. skinner

    Bronco Hunting and Fishing Pics

    Just reviving this thread.. no birds pointed today on public land, but the new pup worked well underfoot...
  7. skinner

    SOLD Front bench seat

    Seat is in good shape to be original cover. Frame is in great shape. Slider works smooth. Has two rips, drivers side bottom back edge and the driver seat bottom side. Can see both in pics. The large rip can not be seen when seat is installed, stitching came unraveled. The large split is covered...
  8. skinner

    SOLD Warn 8274

    Winch runs great, cable is in good shape, remote works and has plenty of connecting cable to battery in good shape (can see the long length of cable to the right of the winch). Winch was only used once a year to hook to back of a small tractor to pull a net through a Coy pond for draining. I...
  9. skinner

    Anyone traveling from Nashville down through central GA anytime soon?

    No need any longer, cant figure out how to delete the thread, sorry
  10. skinner

    Warn 8274

    I am about to try and figure this out. My hope is to keep all my PTO items and just do a minor cut and re-weld on the bumper, keep winch as low as possible.... then one day to keep with originality if that is what I want to go back to just weld it back up stock and ruin it PTO again.. Im just...
  11. skinner

    Bias Ply

    Bias They bounce as they all say above... love them though... 7x15 stock ride height.
  12. skinner

    IN DANA PTO sticker for dash and Visor

    Im in for a set!!!!!!!! tell me when to pay..
  13. skinner

    170 stumbles and shakes at lower RPM

    SCV valve is good, now.. I'll look into the dizzy a bit more... have not had time to dig in as much as I had hoped.. thanks for the help
  14. skinner

    170 stumbles and shakes at lower RPM

    New plugs, wires and cap... This thing will shake your teeth out when you go from 2nd to third if not wound up tight!!! Will do the same into second, first is not as bad, but you can tell its shaking hard.. I have cracked a head once on my rock crawler bronco and it shook like this.. thought...
  15. skinner

    170 stumbles and shakes at lower RPM

    hucklburry rev2, it has a bit of a different sound at idle than normal, seems smooth though. Clutch has had a bit of chatter for a while, just lazy on that part to not replace!
  16. skinner

    170 stumbles and shakes at lower RPM

    Thanks to you all. I’ll go one by one on the recommendations until she runs smooth again. I’m glad to have much smarter folks than myself to help. Thank you again.
  17. skinner

    170 stumbles and shakes at lower RPM

    Going down the road about 55mph, has a back fire or two through the carb. Turn to head home and does it a couple more times. didn't drive it again for a couple days. Drive it again for days, no issue at all. Then driving at 55 it begins to stumble and shake, this time its like its running on 4...
  18. skinner

    Warn 8274

    Have any of you tried to fit one in a Koenig winch bumper, in place fo the PTO winch? I know a bracket inside would need to be fabbed, just thinking.
  19. skinner

    FL My Parts in Lots and Numbers

    Sent you a PM again with my items.. thanks
  20. skinner

    170 carb issue

    It fires right up even after stalling, for a split second and dies as you mash peddle. If you let it sit, like you would a flooded engine it will crank and stay running. At times I can keep cranking with starter and get it to keep firing and run. Replaced coil. Seems to run better. Carb seal...
Top