• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. taipeichris

    How to straighten a Bronco bumper

    Tech article by Chris (taipeichris) How to straighten a bent factory rear or front bumper with the bumper still installed. Tools Required: 1 pair safety glasses 1 pair leather gloves 1 medium hand held sledge hammer 2 medium c-clamps 2 large c-clamps 1 Five foot or...
  2. taipeichris

    Comment by 'taipeichris' in article '3 Arm Wiper Set Up Below the Windshield Frame'

    PS If anyone else does this mod, please post some pics. It would be cool to see this set up on another Bronco besides mine.
  3. taipeichris

    Comment by 'taipeichris' in article '3 Arm Wiper Set Up Below the Windshield Frame'

    sbarb, Nope, it's my original 66 windshield frame but I had to notch it a bit.
  4. taipeichris

    Comment by 'taipeichris' in article 'How to Fix a Broken Motor Mount for About $1.00'

    Years ago my Mustang ate motor mounts like a child eating candy. So after asking around an old timer mechanic I met told me this trick. I must have changed out 7 motor mounts before I did this mod and I've never had to replace it since. [I didn't know new mounts are sold with the bolts already...
  5. taipeichris

    How to Fix a Broken Motor Mount for About $1.00

    Tech article by Chris (taipeichris) For numerous reasons I broke motor mounts in the past, usually I’d find out when I’d hit a bump in the road and the motor jumps up enough to hit the hood. Not cool, right? Parts and Supplies Needed: QuantityParts DescriptionCost1carriage bolt$0.301lock...
  6. taipeichris

    Comment by 'taipeichris' in article '3 Arm Wiper Set Up Below the Windshield Frame'

    ***Yes, this kit will work at the stock location with 2 wiper arms.*** All the parts are available to purchase new but you will need to fab a metal housing if you mount the wiper motor in the passenger cold air vent location. Thanks again! Chris
  7. taipeichris

    Comment by 'taipeichris' in article '3 Arm Wiper Set Up Below the Windshield Frame'

    Something I forgot to mention, the 3rd wiper transmission cost $50 from SPW.
  8. taipeichris

    3 Arm Wiper Set Up Below the Windshield Frame

    Tech article by Chris (taipeichris) I’ve owned my 66 Bronco since August 2004 and my wipers never did a good job. I live in Los Angeles it really doesn’t rain much but almost every morning the entire car is covered in dew, often covering both the inside and outside of the windshield. After...
  9. taipeichris

    Comment by 'taipeichris' in article 'Explorer 5.0 Serpentine Accessory Drive Belt Conversion'

    Awesome job! Excellent write up! Now to get to that point on little to do my list…
  10. taipeichris

    Comment by 'taipeichris' in article 'Brake Line Double Flaring'

    Great write up! It was very helpful and I did use a cheap set from Harbour Freight, I just put the entire tool in my HUGE vice to really hold the flaring tool in place. Thank you admin for all of you effort in making these accessible!
  11. Fabricate Twin Stick Shifters for an Early Ford Bronco

    Fabricate Twin Stick Shifters for an Early Ford Bronco

    Tech article by Chris (taipeichris) Since I’ve owned my 1966 Bronco it never got past 3rd gear for years and I drive the freeways in Los Angeles all the time. Finally I collected the parts to install my new NV3550 and a twin-stick shifter I purchased made for an early Bronco. The problem...
Top