• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. BroncoinAlaska

    EFI Low Fuel Pressure

    Specs: BC Bronco EFI Fuel Tank w/AN Fittings Walbro 255 LPH submersible pump BC Bronco Deluxe fuel line with fuel gauge 24lb Ford Racing Injectors Stock Mustang Fuel Rail Aeromotive Fuel Pressure Regulator Got 50 miles away from home stopped for lunch. Bronco ran great. Jumped back in fired...
  2. BroncoinAlaska

    BC Broncos Fuel Filter

    Looking to replace my EFI fuel filter from the BC Broncos deluxe fuel line kit. I usually just go in and ask for a stock part of a 1992 mustang. But the fuel filters are not the same and BC is not open on the weekends. Anyone have a replacement fuel filter number?
  3. BroncoinAlaska

    EFI Distributor TFI Question

    Looking into getting a new TFI module as it is one of the last EFI sensors I have not swapped for new Motorcraft. I came across two different part numbers at Rock Auto. One for an automatic and one for a 5-speed. Automatic Transmission- DY1076 Standard Transmission- DY1074 They are close in...
  4. BroncoinAlaska

    EFI Vacuum Routing

    Had a few EFI vacuum questions. Current Setup Mustang 5.0 GT40 Tubular Intake PCV in lower GT40 Bronco Script Valve Covers w/PCV valve grommet in drivers side BBK Throttle body caped off breather port My vacuum routing starts at the the PCV in the lower intake manifold and connects to the...
  5. BroncoinAlaska

    Strange Whining / Squealing 5.0 EFI

    Bronco Info: 5.0 Mustang EFI Explorer 5.0 Serpentine (New Alternator, Tensioners, AC Compressor, rebuilt Lee's PS Pump, new belt) GT40 tubular intake Just started getting a whine/squeal that varies with engine speed. Went out and got a new Gates serpentine belt and installed it. When coming to...
  6. BroncoinAlaska

    C4 Shifting Hard and only at Hight RPMs

    Finally got the fuel pump back up to par. The Bronco was pretty much down for 6-8 weeks. Nothing has changed on the Bronco except a new cone filter ( last one was filthy. Now the C4 is acting up. The Bronco always shifted like it has a shift kit in it. Here are the symptoms: 1. The Bronco...
  7. BroncoinAlaska

    EFI Fuel Pump Not Working

    Been daily driving the Bronco for a couple of weeks. Now the EFI pump is not working. It was hiccuping yesterday and it took a few turns to get it to run. So I thought was the ground. So I checked the ground and cleaned it. Still no fuel pump. I checked all the wiring and it all looks good...
  8. BroncoinAlaska

    C4 Shuddering Shaking at Stops

    Daily driving the Bronco again and just shaking out the bugs. I have noticed that the Bronco shakes or shudders when coming to a stop. After some good adive I put the Bronco in Neutral during a few stops today and it stops just fine. When I leave it in Drive and stop the shaking is back. So...
  9. BroncoinAlaska

    Headlights Not Working

    Finally for the Bronco to San Antonio and now the headlights have stoped working. I checked everything before hauling the Bronco from NM to Texas. Everything was fully functional and operating great. We have had a ton of rain. The half cab bulkhead let in rain and I had to wipe down the...
  10. BroncoinAlaska

    Half Cab Bulkhead Sealing

    Now that I have the half cab registered and daily driving. I need to seal the bulkhead better. I know there is a rubber seal for in-between the half cab and bulkhead, but my water is entering the cab from the bottom at the bulkhead. Is there a rubber seal for this? What is the best way to...
  11. BroncoinAlaska

    Door Post VIN Sticker

    I am having a difficult time titling and registering my 77 Bronco. I am at the stage of getting a VIN inspection by the state police. As my door post VIN has been painted over by the pervious owner. The 3 closest DMVs will not even look at the VIN in the glove box. I want to prepair for the...
  12. BroncoinAlaska

    Curb Weight Empty Shell?

    Picked up an other 1977. Bronco is stock without engine, trans, and interior. What would be the weight of the stripped Bronco? I need to tow it a couple hundred miles. I have access to a 2010 Rubicon Unlimited, tow capacity is 3,500. I would also rent a uhaul car trailer. Is the empty...
  13. BroncoinAlaska

    Seapine Green Original Paint

    Looking for photos of Seapine Green Broncos. Thinking about painting the Bronco and I have always been partial to green and ginger. My cousin had a darker green Bronco when I was younger. I was looking through the master list of stock colors and Seapine photo poped...
  14. BroncoinAlaska

    Best Winch Warn 9.5cti-s or ZEON 10-s

    Looking for a winch for my Bailie Built Bumper. Warn is having a 100 dollar rebate trough the month. So I guess I is time to fill that empty space on the bumper. My main question is which is a better choice for an Early Bronco? Warn 9.5cti-s...
  15. BroncoinAlaska

    Hydroboost Kits???

    Looking for hydroboost kit options for my 1977 Bronco. I have seen Wildhorses Hydroboost Kit and it looks nice. I just wanted to see what other kits are out ther for our Early Broncos. I know a lot of people use the Astro van hydroboost. I am just looking for what complete kits are out...
  16. BroncoinAlaska

    Overheated now to check the cooling system

    Just over heated. Glad it was with in a mile of the house. Bronco had been running pretty cool the last couple of drives, right around 180. The heater had been performing not like it should. During a mix of country driving (60mph) and city (40mph). On my way home tonight 30°, I heard a squeal...
  17. BroncoinAlaska

    GT40 Tubular Upper/Lower

    Just got a new to me GT40 Tubular Upper and Lower. The upper is a little scratched and has one dent on the fins. The lower has gunk buildup in the thermostat housing and is dirty. I just want this to look clean and new and spice up the engine bay. What is the best way to clean the...
  18. BroncoinAlaska

    BC Broncos AC Expkorer Serpintine

    I am in the middle of installing the BC Broncos AC system in my 1977 Ranger with a ford cate 302. I am at the part where the instructions say to modify the lower core support. my lower core support dose not look like the instuctions. I am hoping it is another weird 77 line...
  19. BroncoinAlaska

    EFI dies after road trip

    Been driving the bronco longer and longer distances breaking in the EFI so I can use it as my daily driver. It is running better than ever. It has good fuel pressure 40psi, and I have been chasing down all the smaller noises and potential problems. Untill it left me walking 3 miles from home...
  20. BroncoinAlaska

    Need to add AC to my Explorer serpentine

    I am gong to pull the trigger and add AC to the Bronco to drive it on a daily basis once again. I am gong to go with BC AC setup but I need to source a explorer serpentine compressor separately. Each parts store seems to carry a different brand of compressor. Which one is the best unit to get?
Top