• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Z

    289 Explorer Serpentine Conversion Pulley

    Thanks thats what I thought. I'll buy the part from performance products and see if it does what I need it to.
  2. Z

    289 Explorer Serpentine Conversion Pulley

    I'm in the process of tearing apart the front end of my 289 to put on the explorer front dress. I purchased the wild horses serpentine adapter pulley and my balancer doesn't have a male pilot. The balancer is a Performance Products cheap one but works fine. The pulley I removed has a male...
  3. Z

    CT 67 and 77 parts in the Northeast take them all

    I'll check on shipping of the fan and send a PM later. My 77 came with a grant steering wheel. The wheel I have looks like it could be from a 77 . But I can't promise it's from an actual 77. Has the usual cracks but not too bad. I don't have the horn button. I'll post more photos of it...
  4. Z

    Air Cleaner Assembly

    Yes still for sale. I'll pm you
  5. Z

    Air Cleaner Assembly

    Air cleaner assembly. What you see is what you get. Pretty good shape except missing bracket. $70 plus shipping. I had it in my 77. I think it's correct for the year but not positive. Sent from my SM-G950U using Tapatalk
  6. Z

    Air cleaners and fan

    7 blade mechanical fan -$65 plus shipping Air cleaner from a 67 v8 $100 plus shipping Air cleaner off a 77 (I think) $75 plus shipping. Needs new bracket. Rtv between snorkel and housing. Air cleaners could use a clean up and fresh paint. I have the plastic air intake tube for the 77...
  7. Z

    CT 67 and 77 parts in the Northeast take them all

    Tops are gone. I also have two Dana 20 transfer cases T-Shift, both attached to 3 speed manual transmissions. One has the bell housing attached one has the bell housing loose. With clutch fork. Make offer. Dash is also still available as well as 77 plastic gas tank and skid plate and...
  8. Z

    CT 67 and 77 parts in the Northeast take them all

    Grill is sold, fuel doors sold, surge tank sold. Fenders and hood are free to anyone who wants to pick them up in Stamford CT. Okay for a beater but rough. Hood would be okay with a little weld repair. Manual steering box is nice. Not much time on it since rebuild. With pitman arm. I'll...
  9. Z

    CT Np203 for sale

    NP203 transfer case. Been sitting for a while. Make offer and pick it up Sent from my SM-G950U using Tapatalk
  10. Z

    CT 67 and 77 parts in the Northeast take them all

    I have two complete tops. One from the 67 and one from the 77. The 77 has chrome trim. The 77 is in better shape than the 67. Still some rust but seems solid. They are upstairs in a barn. So getting them down will not be easy. I was gonna junk the 67 top and take it down in peices. If...
  11. Z

    CT 67 and 77 parts in the Northeast take them all

    Nobody wanted the entire lot so I am selling off parts. I will ship anything that I can fit in a box. Grill has been sold, rear end has been sold, fuel doors have been sold. I also have fuel pump for vacuum wipers. Should probably be rebuilt. 67 steering wheel with horn button (I couldn't...
  12. Z

    CT 67 and 77 parts in the Northeast take them all

    I'm not positive but I think it's an np205 out of a late 70s f250 high boy. I had that as a parts truck at one point. If it's out of that it ran fine. Feel free to correct me if you think it's something else. I looked quickly for a tag but it could just be covered in grease. I think I have...
  13. Z

    CT 67 and 77 parts in the Northeast take them all

    More photos Sent from my SM-G950U using Tapatalk
  14. Z

    CT 67 and 77 parts in the Northeast take them all

    Two front fender flares, mechanical fan, rebuilt manual steering box with the pitman arm and linkage, various driveshafts, duraspark ii distributer, heater box, numerous intake manifold and carbs, both 2 and 4 barrel. All OEM ford Sent from my SM-G950U using Tapatalk
  15. Z

    CT 67 and 77 parts in the Northeast take them all

    Fenders are in rough shape. Okay for a real beater. door panels are rough but maybe someone really needs them. Hood is from 67. One bad spot that will need to be repaired. Sent from my SM-G950U using Tapatalk
  16. Z

    CT 67 and 77 parts in the Northeast take them all

    Start of some photos. They are a mix of 1977 and 1967 and some extra stuff picked up along the way. I have more photos but too much to post. Im willing to ship small things but big stuff I would want picked up. Sent from my SM-G950U using Tapatalk
  17. Z

    CT 67 and 77 parts in the Northeast take them all

    Pics coming this weekend. 67 grill has a rust in the usual areas where it mounts to the fenders and at the bottom corners. Air cleaner is off eBay before I went efi. I don't know if it was originally for a 302 or 289. But come to think of it I may have the original 67 289 air cleaner laying...
  18. Z

    CT 67 and 77 parts in the Northeast take them all

    Yes actually parts in the Northeast. Maybe you can save some shipping costs. I have purposely not listed prices. I am hoping someone will make me an offer for it all and come pick it up. I will post photos this weekend but I thought I would post now in case someone wants a specific photo.a...
  19. Z

    New York.What to see,explore.

    Its not cars but the Intrepid Museum is definitely worth seeing
  20. Z

    Where to buy automotive paint.

    I used TCP Global single stage urethane on top of their ISO Free 2k primer. Its Viper Yellow and Graphite Grey Metalic. I was impressed with how well the metallic came out for a single stage. The yellow took A LOT of paint, and that's an understatement. It didn't cover the grey primer well...
Top