• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. DonH

    SOLD 1967 Bronco Sport Surviver UPdate

    Progress coming along. Power steering hose problem leaks fixed. Power brakes not working realy well. May have wrong master cylender. I think it may be sold wendsday.
  2. DonH

    1967 Alive.

    Gas station and back about four miles, no tags or power steering but new engine was impresive.
  3. DonH

    1967 Alive.

    There are a few things to do to get it on the road. the brakes are not working as they should I am having problems getting a power steering hose to fit my setup. As far as being done that is not going to happen.
  4. DonH

    1967 Alive.

    My 1967 project moved on its own power yesterday. Very nice feeling. Don
  5. DonH

    Door latch and door seals

    Door seals were installed on both doors Both doors requide a very ferm closing . Maybe after a couple of days the rubber will take a better fit. My problem with the drivers door was the door latch post was to small in diameter to stay in the door latch. When I slamed the door it would just...
  6. DonH

    Door latch and door seals

    Well I got the door to latch. The door post was worn so I did a little welding. I guess I did not do enough welding. The best I could measure the door post was not large enough to make the door latch to latch. So I got the welder nout and made it larger. Took my hood off and closed the door and...
  7. DonH

    Door latch and door seals

    Ok that is problem. The screws holding the post on the body are stripped and will require some heat to get it loose to maybe get it to move outward. That is not a soulition without removing the bottom seal. I will start removing the seal a little at a time hopeing it will latch.
  8. DonH

    Door latch and door seals

    I just installed upper and lower door seals on my 67. It in itself is a learning curve. Now the door would not latch. It would latch before the seals were installed. The door had been repaired by PO by welding on a plate around latch. I thought that may be the problem so I removed the latch and...
  9. DonH

    Fuel gauge

    The two inch fuel gauge I installed in the dash is not compatable with the new Ford tank sensor. Does anyone know of a brand of two inch gauge that may be compatable with the Ford sensor. It would be easier to get a new gauge than drop the tank and installing a compatable sensor.
  10. DonH

    SOLD 1967 Bronco Sport Surviver UPdate

    I have been working on the doors. Half the parts ordered do not fit. I have to install the door seals maybe today. A few engine pictures. I might get on the road for a short drive this week. Still a work in progress.
  11. DonH

    SOLD 1967 Bronco Sport Surviver UPdate

    This Bronco is stil a work in progress. I have door and window parts coming. The engine runs but has only run about two minutes. If I get it running I will want to take for a drive. I have a few loose ends to finish first. Don
  12. DonH

    SOLD 1967 Bronco Sport Surviver UPdate

    This Bronco moved on its own power today sence 1978. What a great feeling getting a two year project on the road for the first time. I have put rattle can primer to stop any rust from comming back from my work. I am not a body and paint person. This Bronco is very solid and will last for many...
  13. DonH

    C4 modulator

    Thanks guys. This C4 was removed from a 1977 Bronco, I will order a modulator with a green strip that pushes in, not tthreaded. Don
  14. DonH

    C4 modulator

    I have installed a 1977 c4 in my 1967 project. The modulator is loose and bent and needs to be replaces. I understand there severial options. something about color bands. What is recomended. for my mildly camed four barrel 289? Don
  15. DonH

    WA 66-67 Driver Door

    I need a drivers door for my 67. Don
  16. DonH

    WA 66-67 Drivers Door

    I need a drivers door.
  17. DonH

    67 Dash Pad

    My 67 dashpad is cracked open in a couple of places. Is there a kit to repair or replace the cover? Don
Top