Search results

I have a 74 Bronco with a 93 efi motor in it. I pulled out of the garage, and it killed. It hasn't started since. It has been 3 days now. I checked and it is getting fuel. I am somewhat at a loss when it comes to electronic ignitions and fuel injection. Can you guys think of something...

I am thinking of ordering a Fierce Front Winch prerunner bumper with D ring mounts. Do any of you guys have one of these bumpers` on your truck? If you do, would you please post a picture of it? The picture on Jeffs web site isn't real great. I need to see what it looks like before I order...

I have a 74 Bronco that has been converted to a 5.0 efi motor. I think the motor is from '93 or '94. It has a single stock rear gas tank. The fuel line , the fuel pump (in line, mounted on the frame) and the fuel filter have all been replaced. The rotor and spark plug wires are only 2 years...

My Bronco is blue, but the hood has a couple of bubbles in it as well as some swirls from sanding. This is my fault, but I thought the hood was good enough to paint. Well, I want to do some body work on the hood, then paint it satin black. My wife doesn't think this is a very good idea. So...

I am ready to replace my heater valve. My motor has been changed by the previous owner to a '93 5.0 liter efi. Does anyone have a picture of the heater valve installed? I would like to see exactly where it goes. I don't think my truck has a heater valve because there is always hot air...

I just received my new parts catalog from Tom's. I must say they did a fine job on it. There are many new photos of classic Broncos as well as a centerfold. Keep up the good work, guys.

I just bought a Rampage top from one of the vendors on this site. I have had issues with certain parts of the top. My question is, did any of you guys buy a top and have issues with it? The vendor did all he could to make it right, but it is the supplier, not the vendor.

I have a '74 Bronco with a J-shift transfer case. I recently installed a WH twin stick setup. It also has an AX-15 5 speed trans. As I move down the highway at about 55 mph, the transfer case pops out of gear into neutral. I have to stop the truck, put the transfer case back into 2 Hi and...

I have a 74 Bronco with a Wild Horses twin stick shifter. The stick on the right that controls the back wheels works fine. It shifts from N to 4Hi then up to 4Lo. The shifter on the left, that controls the front wheels, will shift from N to 4Hi, but makes a terrible "clunk" when shifting back...

My Wild Horses twin stick shifter has come loose and I cannot get the left lever to go into the low position. I have been under the truck, removed the skid plate, and found the nut that is loose. I took off my shift boot for the sticks and 5 speed, cut the carpet, and found the head for the...

On the way... What we woke up to in Kentucky At the Celebration

I just read the thread on anti-theft devices. I am trailering on a u-haul trailer my Bronco to the celebration. We are staying over night on the way down because it will be a 2 day trip from Wisconsin. I have been wondering for 2 weeks if my Bronco, on the trailer, will be safe while we are...

Do you need to register anywhere to attend the Super Celebration? Is there a fee? Who do I need to contact? We are planning to attend for the first time. Thanks

I'm getting ready to mount my chrome strips back on the side of my Bronco. I thought I would run masking tape down the side to make sure I have a straight line. Then I would measure up from the bottom, half of the strip, about 11/16, and make marks where to drill my holes. Then, I would remove...

Well we have had a thread for many colors. I would like to see some blue Broncos. Here's my Lightning Blue 74.

I bought these Ansen wheels about 5 years ago. The black ring on the outside was fine then, but my tastes have changed. I would like to paint or powdercoat the rings, but am not sure how to remove them. I removed all the bolts, but the ring wouldn't budge. Does the tire have to be deflated to...

After looking at my steering shaft, I have determined that I am missing the bearing that the shaft turns in. It would be just above the knuckle in the shaft. How big of a deal is it to install one? All help and advice is appreciated..

When I bought my Bronco, it had the beltline trim package on it. The trim was dull, had some dents, and I decided I didn't want it on the truck. Then I found a video on Youtube that showed how to remove dents and how to buff it up and make it look new again. It was a lot of work, but the...

I have seen a lot of posts saying that their truck has a gun rack, or they wish they had a gun rack, etc. When I bought my '71 back in 1989, it had a gun rack in the left rear window. Since it came from Texas, I figured the owner had installed it. I took it out and just recently found it...

Back in the '60s and early 70's the Nylint Corporation in Rockford, IL. made all kinds of toy trucks, like garbage trucks, fire trucks, and other toys, etc. In the middle 80's, we were in a junk shop in Monroe, WI., and I ran across an early Nylint Bronco! I'd had Bronco fever for a couple of...