• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. H

    5.0 EFI water tube and water sensor alternatives

    does anybody have an alternative part that will delete this tube setup? I'm looking for something that'll still screw into factory intake water port and also house the water temp sensor but allow me to connect to heater hose in that front portion of the engine rather than running to the...
  2. H

    AZ Wanted BC Bronco remote hood latch setup

    Looking to buy the BC Bronco part 62-30033 internal hood release kit for my 69 bronco build. If someone has another kit that would work please message me as well Thanks Nate
  3. H

    New seat foam … is this normal?

    It was Toms but they made it right and sent me replacements that were good. I don't know who actually made the foam.
  4. H

    AC Compressor on passenger side ?

    Is your crank pulley a two groove or 3? I’m just trying to see where the compressor belt is running and how it gets tension, Is there an idler pulley like the factory had and a 3-groove crank pulley?
  5. H

    New seat foam … is this normal?

    Thank you guys, I’ll have them swapped out i appreciate it!
  6. H

    New seat foam … is this normal?

    My new seat foam just came in from one of our vendors, but there’s holes in both front bucket back cushions as seen in the pics, should I push for a replacement or is this acceptable quality? First crack at upholstery so I don’t have much reference other than it doesn’t seem right to me
  7. H

    AZ Passenger side AC compressor bracket wanted

    Looks like I jumped the gun too quick, I'll see fi the Ebay seller will cancel my order- thank you again for the help, I'm sure I'll need some pointers when I actually get the bracket and items in hand
  8. H

    AZ Passenger side AC compressor bracket wanted

    purchased all of those, thank you!
  9. H

    AZ Passenger side AC compressor bracket wanted

    Thebone is hooking me up with an AC bracket! Very excited for that, it doesn't have the idler assembly on it, can you point me in the best direction to source that setup? Thank you
  10. H

    AZ Passenger side AC compressor bracket wanted

    Great, I will... thank you! And it's a 3-bolt pulley I just found old pictures (I'm at work currently not around the bronco)
  11. H

    AZ Passenger side AC compressor bracket wanted

    Do you happen to have a recommendation for that crankshaft pulley? It's a 69, original 302, I believe it's a 4-bolt
  12. H

    AZ Passenger side AC compressor bracket wanted

    And does the sanden run off the same two groove water pump pulley and same track as alternator?
  13. H

    AZ Passenger side AC compressor bracket wanted

    Awesome, thank you I really appreciate it
  14. H

    AZ Passenger side AC compressor bracket wanted

    Do you have an idler pully for your sanden or did you run it without? Thank you for the pics and description, very helpful!
  15. H

    AZ Passenger side AC compressor bracket wanted

    is it just one bracket on the front of the head or is there a second bracket that goes to the exhaust manifold side of the motor
  16. H

    AZ Passenger side AC compressor bracket wanted

    Awesome thank you, would that dealer add-on ac compressor bracket change the location of my alternator in the stock passenger side position or does it work in conjunction with that?
  17. H

    AZ Passenger side AC compressor bracket wanted

    I think I'll be able to find an adapter to the sanden so yes that would be great if you had one!
  18. Bronco pics

    Bronco pics

  19. engine1.PNG

    engine1.PNG

Top