• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. R

    TX Need brake petal assembly and tailgate handle and parts

    Need brake assembly for auto tranny and power brakes. Need tailgate latches, handle and any associated parts. Thanks
  2. R

    TX frame rail needed from bumper to front crossmember

    Need drivers side front frame rail all the way from the bumper horn to front cross member. Thanks
  3. R

    Calling all Super Duty Axle folks!

    My goal has always been to run 42X14.50X17 MTR's. I want the full width for the stability. I want to go with the 2005+ Super Duty axles front and rear. Discovered this kit from Rough Stuff that uses the existing radius arm mounts on the front D60. Radius arms would have to be mounted outside...
  4. R

    Is there a way to lower the PS pump?

    I have a PSC pump and remote reservoir. The problem is the reservoir is tall, so for it to have a short down hill run to the pump, it sets above the hood. Previous owner cut a hole in the hood, but want it back under the hood. I have the 302 and I believe stock mounting bracket for the pump...
  5. R

    Need options to mount my PS steering pump lower

    I'm trying to hook up PSC pump and remote reservoir. The problem is the reservoir is too tall to fit under the hood and have a short run down hill to the pump. Previous owner had the reservoir sticking out through the hood and I can't hang with that. I'm hoping I can lower the pump, then I...
  6. R

    Hydroboost parts that do not come with remanufactured unit

    Yelp, I did it now. Got my rebuilt AstroVan hydroboost from Rock Auto and it does not come with the Master cylinder push rod, spring and spring retainer. Is there place that sells just these parts? Thanks in advance
  7. R

    Steering intermediate shaft joint question

    I believe this shaft is off a stock EB. The end in question and the bottom joint on the shaft, is in the first pict. Shaft is 3/4". All I've been able to come up with is "Smooth joint"? The second pict is the contraption that was on the end of this shaft and don't want to go back to that if...
Top