• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. BwoncoHowie

    So Why your handle? & Explain your avatar

    I think a lot of us want to know more about our message board friends. This could be a lot of fun so I'll start. Years ago my 4 year old nephew asked me... "Uncle Howie, are we going to go for a wide in the bwonco?" Naturally we did shortly after that. I took him on a putt through a vacant...
  2. BwoncoHowie

    What are you running for shocks up front?

    I just took off the rancho rs 7000 Was never happy with them. Too stiff for the 2.5" lift progressive coils. All the urethane insulators were blown out or crumbling but the shocks were still stiff as ever. I Was considering bilstein or KYB. I'm running Duff 70/30 singles bolted to the Bill...
  3. BwoncoHowie

    Are You Tired of H-4 Headlight Questions Yet?

    Ok, I got my H-4s installed a while back with home-made plug-n-play twin Bosch relay harness. Everything lights-up beautifully, but I think my Bosch reflector housings are a little much for oncoming drivers. When I'm driving down a residential street, these lights light up the front yards of the...
  4. BwoncoHowie

    Attn: Borg Warner T-19 Gurus need help!!!

    I think i may have a maindrive to cluster gear tooth mismatch. The bearings are fine, the oil is fine, and I get a loud gear whine 1st-through 3rd, trans gets quiet in fourth My maindrive tooth count is 17 and counter front gear is 43. Is this correct or do I need to change the maindrive gear...
  5. BwoncoHowie

    Carburetor Accelerator pump keeps pissing 2100 2V

    I have changed the diaphram twice in the past 6 months. It seems that the pot metal keeps warping on the pump lever housing, on my 1973 Motorcraft/Autolite 2100. It drips or squirts (only when I step on the skinny pedal) all over the intake manifold and my engine stinks like gas. Anybody have...
  6. BwoncoHowie

    Who is running H-4 Halogen headlights?

    I know this subject has been beaten to death on this forum but wondered if there were any fresh ideas out there. I just wanted to see what you have and how did you do it. What did you do for a relay harness? What wattage bulbs are you driving? Since Cibie lenses are to hard to find at a...
  7. BwoncoHowie

    Need a C-4 output shaft that fits dana20 input

    I already have the trans, and need only the factory correct C-4 output shaft that mates up to the transfer case. Does anyone have one of these for sale? Thx, ~BH~
  8. BwoncoHowie

    PS Cooler Finally Got Pics of the install

    I recently got rid of the stock cooler because it was too small and only received second hand warm air from the engine compartment. It was a pain mounting the new cooler in front of the rad but i managed to find a home for it below the hood latch. It is a Long Manufacturing stacked plate design...
  9. BwoncoHowie

    AAARRGG! Engine paint all shades of Ford blue incorrect

    Has anyone out there found a brand of rattle can paint for the engine that has the correct shade of ford blue for 1969 - 1973 The stuff I have found so far has been either too bright or too dark. ?:?
  10. BwoncoHowie

    Broncow's creation; That is gonna be 1 FUN ride

    Anybody seen this yet? http://classicbroncos.com/photos/showphoto.php?photo=6827&sort=1&cat=500&page=1 Most cool! It's not even finished in this pic and I like it already :) :) :)
  11. BwoncoHowie

    Attn: Engine builders. Which side is Up on the top ring?

    I have this Speed Pro single moly ring set. The instructions dont state which side is up on the top compression ring ?:? The ring has a bevel on the inside edge and a dimple on one side of the ring. With the ring installed, is the dimple supposed face up or down? Will someone who has...
  12. BwoncoHowie

    Where can I get the little plastic thingeys?

    I'm looking for the little plastic push-in anchors for attaching the side bed seals to the hardtop. Any idea where I can purchase these? ?:? Any help is much appreciated, Thanks, BH
  13. BwoncoHowie

    Spotted a EB in a DKNY ad

    It was in Robinsons May store. In the DKNY clothing department for women. The model on the poster was sporting the designer clothing while leaning against a Metalic Root Beer colored Bronco that had white fender flares. I just thought it interesting that even a trendy clothing company thinks...
  14. BwoncoHowie

    Battery Ground, Are they supposed to be this way?

    I'm just looking for info about those of you who have a factory stock bronco with no major electrical mods under the hood. When I bought my Bronco it had a big sheet metal screw attaching my battery (-) ground cable to the fender well. Then another one from the engine block connected there...
  15. BwoncoHowie

    Bronco Spotted

    Last Friday Night (14th) In Centennial Wyoming. I saw a tan one, it was uncut and looked like original paint. It looked like about a 1976 with white Ford decal striping. It was parked next door to the Old Corral Grubslinger. It was fun being so far from home and spotting another EB. I don't...
  16. BwoncoHowie

    Nissan Exterra Power Steering conversion (Who Has Done it?)

    There are a lot of EBrs here interested in this conversion. What did you need to do to make it work? Frame mods, Hose connections, Pitman Arm, Column coupling, etc. What pump did you use? Can you post pictures? Any info on this subject is much appreciated, please help! Thanks, ~bh
  17. BwoncoHowie

    Need a source for a Bronco used part HELP!

    Can anyone post that web address for that used bronco part place out on the east coast? It's driving me nuts because one of these posts has it in there but I cant find it. I have already wasted too much time looking for it. ?:? Thanks ~BH
  18. BwoncoHowie

    Opened My Canned Ham

    It has about 16 moving parts, fairly simple. I found this hydroboost pump at the boneyard on a Lincoln Mark V. No telling how long the cap was left off, so I decided to take it apart for cleaning. Seems to be in perfect shape for being off a car that is now 25 years old. Now I may just go ahead...
  19. BwoncoHowie

    Steering stabilizer Boot munched again!!

    The u-bolts keep tearing up my steering shock boot at the end that attaches to the drag link. I tried grinding the long ends off the U-Bolts and that didn't work, I just ruined a brand new Boot! :mad: :mad: :mad: WTF is going on here? Does anyone have a remedy for this. AaaaaRRRRgggg!
  20. BwoncoHowie

    Notice: Robertshaw High Performance Thermostats

    Since Autozone stopped carrying the Robertshaw designed High Performance thermostats now being made by Cooper Standard, the retailers of this product were hard to find. Some of you have been able to solve some of your cooling system issues by the use of Robertshaw High Performance thermostats...
Top