View Single Post
Old 07/24/16, 10:31 AM   #1
migs
Sponsor/Vendor
Bronco Guru
 
migs's Avatar
 
NH
Joined: Nov 11
Posts: 1,067
Long Travel Single Rear Shock Mounts

New rear shock mounts for those looking for an alternative to mounting a single shock in the forward leaning position.
This is an updated design of the previous version, I made a few minor changes and they are a little lighter as well.

They are designed to fit a longer than stock shock and will only work with a 1" or taller body lift. A 1" lift will require minor trimming of the lower wheel tub lip under the floor, any body lift taller than 1" should not require any trimming.
The mounts are tilted upward slightly to better match the angle of the shock.
Shock length will ultimately depend upon suspension lift and travel, where the rear axle is positioned and location of the upper and lower mounts.

Made from 3/16" hot rolled P&O steel with 3/16" along with 1-1/2" .188 wall DOM tubing. The shock mounting tabs have 1-1/2" inner spacing and holes for 1/2" bolts.

They are only available as bare steel, You will need to to paint or coat them as You see fit.

They can be welded on or bolted on to the frame rail.
I do have available an additional 7/16" grade 8 mounting hardware and backing plate kit as an option for bolting through the frame rail.

Sold in sets consisting of a left and right shock mount.

Also available with the addition of the optional mounting hardware to attach them to the frame.

Lower shock mounts are not included, there are many options out there and differing ideas on how and where to fit them.

+++Please be advised, if planning on using Bilstein 7100 model shocks with remote reservoir, there can be clearance issues that may need to be dealt with due to the hose fitting angle where it exits the shock body.+++

The Price per pair is $199.00, shipping included anywhere in the continental US.
Add $20.00 if you wish to purchase the optional frame mounting hardware kit as well.



I try to keep at least one set on the shelf ready to go, but there is the possibility that I may have to weld a set up at the time of order possibly delaying shipment a day or two.

Please send me a private message if interested in purchasing, or with any other questions. Thank You.


CLICK HERE to see the prototype phase from my build thread.
Attached Thumbnails
Click image for larger version

Name:	IMG_4352.jpg
Views:	78
Size:	45.6 KB
ID:	465854   Click image for larger version

Name:	IMG_4347.jpg
Views:	61
Size:	46.8 KB
ID:	465855   Click image for larger version

Name:	IMG_4348.jpg
Views:	50
Size:	41.9 KB
ID:	465856   Click image for larger version

Name:	IMG_4349.jpg
Views:	49
Size:	51.1 KB
ID:	465857  

Click image for larger version

Name:	IMG_4350.jpg
Views:	45
Size:	43.7 KB
ID:	465858   Click image for larger version

Name:	IMG_4351.jpg
Views:	48
Size:	55.2 KB
ID:	465859   Click image for larger version

Name:	IMG_4353.jpg
Views:	59
Size:	48.0 KB
ID:	465860   Click image for larger version

Name:	IMG_4354.jpg
Views:	44
Size:	47.0 KB
ID:	465861  

Click image for larger version

Name:	IMG_4355.jpg
Views:	41
Size:	45.5 KB
ID:	465862   Click image for larger version

Name:	IMG_7961.jpg
Views:	34
Size:	79.1 KB
ID:	465863  

Last edited by migs; 11/26/18 at 07:54 AM.. Reason: back in stock with updated version

migs is offline   Reply With Quote
 
Page generated in 0.27508 seconds with 61 queries