eric0o1
Sr. Member
- Joined
- Apr 17, 2008
- Messages
- 592
the new harness will come with a new plastic glovebox with all the neccessary mounting holes for the fuse block already in it. I will post a picture as soon as I have another one in hand.This will alow the late '71 and up guys to mount the fuse block in the stock location. This also means that the 66-early 71's will move the fuseblcok from the firewall to the glovebox. I'm sure ther will be a few guys who do not like the idea of their fuseblcok being in the glovebox and want it in the afactory location, but putting in the glove box was the best decision I believe. It's easy to get to, it moves the fuse block up higher from the floor pan (for you guys who like playing in the water), and it seemed to be the preferred location throughtout the Bronco community. For those of you who have an older version of our 20 circuit, we will probably be offering the glovebox for purchase seperately so you to can have this advantage. I will also be providing a template in the instruction manual for you guys with the steel boxes that will allow you to cut your box to mount the fuse block if you so desire. If someone doesn't want to mount ithe fuseblcok in the glovebox, there is enough length that they could hide it anywhere under the dash from about midppoint of the dash over to the passenger side.