chuck
Bronco Guru
Yes but they are on hold until the top is in production.Chuck
Great job. I likey;D ;D ;D
Any plans in the works for soft doors?
Yes but they are on hold until the top is in production.Chuck
Great job. I likey;D ;D ;D
Any plans in the works for soft doors?
The front can be rolled back or removed by removing 3 strapes and the snaps across the fronti don't see any pics with the top in "Moon roof/targa" mode. Is it convenient to do? Or, is it sum-what aquward to accomplish this?
I know the new Heep and Geo Snacker tops have mech to unclip and then fold back the top as easy as a sun-roof dose on modern cars, is it this easy on this top??
Regardless, I dig it and am scrape'n the piggy's belly as we speak, by the time they are for sale I'll be place'n the order!
THX CHUCK!!!!!!!!!!
At the side or center? The hoops are higher in the center.
I will measure from the floor to the top of the center of the hoop tomorrow and let you know.Sorry, I'm tying to find out how tall from the bed rails to the highest point. Or how much taller is the center than a stock hard top?
?:? ?:?how does it seal in the middle there? With all the rain in the winter I wouldn't want it to rain inside too.
The front and rear part of our top is stretched seperately so either part can be removed leaving the other part tight. In fact the rear part (rear frame, rear top, side windows and rear window) can all be removed together and remain tight by removing 8 bolts and un zipping the 2 parts. The front and rear part of the top is connected by a zipper and the zipper is covered by a flap that uses 1 velcro to hold it down. The zipper is on top of a hoop. A water hose does not produce leaks.
77BroncoWag. Here's a clip from post #37
thanks! Guess I was blinded by the 14 hr work day