SOLD FOrd SB 427CI Windsor

rcmbronc · Jul 16, 2019

I just finished building this engine and getting it running in my Bronco. It is awesome and makes great power. No complaints on the engine. Just thinking I want to build another motor for it.

Ford Small Block Windsor 427 CI

Ohio Crankshaft Short Block
Dart SHP Block 9.5 x 4.125 bore
Ohio Crankshaft Forged 4340 4.0 Crankshaft
JE Forged Pistons -30cc
10-1 Compression with the 58cc heads
Total Seal Rigs
Internally Balanced Assy
Ohio Crankshaft H Beam Rods
AFR Renegade 205cc Heads – 58cc
SS Valves
Solid Roller Springs
Screw in Studs and Guide Plates
4 Bolt Balancer Internal Balance
Comp Cams Solid Roller Cam 35-770-8
Comp Cams Solid Roller Lifters
Howards 1.6 7/15” Aluminum Roller Rockers
AFR Aluminum Stud Girdles
Edelbrock Super Victor EFI Intake 29245
Power Products Fabricated Valve Covers or Ford Motorsports Valve Covers
Moroso 20520 Rear Sump Oil Pan, Pickup and Dipstick
Melling HV Oil Pump
Comp Cams Hi Tech Push Rods
ARP Head Studs
ARP Fasteners

For additional cost I can include a complete Haltech 2000 Elite EFI system for the motor. It would include the following for an additional $3,750. This is a great EFI system with excellent adjust ability.

MSD 55098 Street Fire Coils – 8 Coils
MSD Wires
AccuFab 1215 CFM 4150 Throttle Body
Bosch 65 lb Injectors
Fuel Regulator
Haltech Elite 2000 ECU and wiring Harness
Holley Dual Sync Distributor
OBD II Adapter

I can also separate the intake manifold and/or oil pan for a reduced cost if you dont want that also.

Boss Hugg · Jul 17, 2019

Bill Gates once said, "NO ONE will ever need more than 351 cubic inches. In the same way, no one will ever need more than 256 kilobytes of storage capacity."

well, it was to that effect, anyway...

I guess he didn't realize that time changes things.

Here's a bump for you.

hyghlndr · Jul 17, 2019

Why the sudden change? My 427 stroker is better than the Coyote powered Bronco.

rcmbronc · Jul 17, 2019

Just want to do something different. Awesome engine great power. Just like building I guess.

73azbronco · Jul 17, 2019

I love building, went through three before settling on 347, probably may go 427 some day, just not today.

This is a great deal guys, seriously, like half price for what you are getting.

bigmuddy · Jul 18, 2019

I would love to have that in a little cobra replica!

Glass Pony · Jul 18, 2019

bigmuddy said:
I would love to have that in a little cobra replica!

My brother has one in his. It's a Roush build and when I seen that 351w block I said "we can bolt that right in my Bronco!"
He took me for a ride in it and you can smoke the tires in third gear if you mash it a little too hard.

rcmbronc · Jul 18, 2019

bigmuddy said:
I would love to have that in a little cobra replica!

If I dont sell it that may be what I do.

bigmuddy · Jul 18, 2019

rcmbronc said:
If I dont sell it that may be what I do.

Man that would be wicked! Cobra is on my retirement bucket list, if I don't buy one pre-built before hand..

Truly, though the only reason I haven't taken that further sooner is that I live on a sometimes bad stretch of gravel road and I am afraid I would rip the bottom out!

1strodeo · Jul 18, 2019

bigmuddy said:
Man that would be wicked! Cobra is on my retirement bucket list, if I don't buy one pre-built before hand..

Truly, though the only reason I haven't taken that further sooner is that I live on a sometimes bad stretch of gravel road and I am afraid I would rip the bottom out!

then you need a BronCobra

rcmbronc · Aug 14, 2019

Bump to the top. Great start to a winter project.

Mikesimp70 · Aug 14, 2019

Come on man, we are all dying to know... If you aren’t putting that wicked engine in your Bronco, what is this other direction you are taking?

rcmbronc · Aug 14, 2019

Really not totally sure yet. If I dont sell the motor I may get a Kit Cobra for it or other.

Not sure what to put back in the bronco yet.

ultrarunner7 · Aug 15, 2019

hyghlndr said:
why the sudden change? My 427 stroker is better than the coyote powered bronco.

rcmbronc · Sep 5, 2019

Open to offers

fordguy · Sep 5, 2019

i vote for putting it in a 65-66 f/b mustang

rcmbronc · Sep 5, 2019

That would be wild. If I can find one I would.

rcmbronc · Oct 23, 2019

Still for sale. Make me an offer.

SOLD FOrd SB 427CI Windsor

rcmbronc

Bronco Guru

Attachments

Boss Hugg

Bronco Guru

hyghlndr

Bronco Guru

rcmbronc

Bronco Guru

73azbronco

Bronco Guru

bigmuddy

Bronco Guru

Glass Pony

Bronco Guru

rcmbronc

Bronco Guru

bigmuddy

Bronco Guru

1strodeo

Squirrel Watcher

rcmbronc

Bronco Guru

Mikesimp70

Full Member

rcmbronc

Bronco Guru

ultrarunner7

New Member

rcmbronc

Bronco Guru

fordguy

Bronco Guru

rcmbronc

Bronco Guru

rcmbronc

Bronco Guru

Similar threads